Kenmore 790.7752, 790.7753 manual Before Using Your Range, Assembly of Burner Heads & Burner Caps

Models: 790.7752 790.7751 790.7754 790.7753

1 44
Download 44 pages 44.71 Kb
Page 7
Image 7

Before Using Your Range

Assembly of Burner Heads & Burner Caps

Your range is shipped with the Burner Heads and Burner Caps in the correct locations. Packing material may be located between the Burner Heads and the cooktop.

The following instructions apply to all burners except the right front double burner. For assembly instructions for the double burner see the General Care & Cleaning section.

a. Be sure to follow the installation instructions before

 

 

 

 

installing and using your new range.

 

 

 

 

b. Remove all packing tape from cooktop area. Remove all

 

 

 

 

Burner Caps and Burner Heads.

 

 

 

 

c. Discard all packing material located under Burner Heads.

 

 

Fig. 2

 

d. To replace Burner Heads & Caps, match the letters

 

 

 

located under center of Burner Caps with the letters

 

 

 

 

located inside Burner Heads (Fig. 1).

 

 

 

 

e. Match the letters stamped on Burner Skirts with Burner

 

 

Electrodes

must

Heads and Burner Caps (See Fig. 1). Replace the Burner

 

 

 

 

align into slot for each Burner

Heads and Caps on cooktop (See Fig. 2). Carefully align

Fig. 1

Fig. 3

Head, except

right front

the Electrodes into slot of each Burner Head (Fig. 3).

 

 

 

 

burner.

Note: The Burner Heads should sit flat on Cooktop

Burner Skirts.

f. Unpack Burner Grates and position on the cooktop.

Page 7
Image 7
Kenmore 790.7752, 790.7753, 790.7754, 790.7751 manual Before Using Your Range, Assembly of Burner Heads & Burner Caps