Kenmore 790.7754, 790.7753 manual Setting Continuous Bake or 12 Hour Energy Saving, Setting Timer

Setting Oven Controls

•Continuous Bake or Twelve Hour Energy Saving Mode

•Timer

Setting Continuous Bake or 12 Hour Energy Saving

The TIMER _si_o_j_and FLEX CLEAN _ pads control the Continuous Bake or 12 Hour Energy Saving features. The

oven control has a factory preset built-in 12 Hour Energy Saving featu re that will shut off the oven if the oven control is left

on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

INSTRUCTIONS

To set the control for Continuous Bake or 12 Hour Energy Saving features:

1.Press and hold _si_o_frfor 6 seconds or until the control beeps

once, (Fig.l). "12h" or "== h" will appear in the display and the control will beep once.

2.Press _c_n_ to switch between the 12 Hour Energy Saving and

continuous bake features. Note: "12h" (See Fig. 2) in the display indicates the control is set for 12 Hour Energy Saving

feature and "= = h" (See Fig. 3) indicates the control is set for the Continuous Bake feature,

3. Press to accept the change (See Fig. 4) display will

PRESSDISPLAY

_for6seconds

Fig. 1

Fig. 2

return to time of day or press Q to reject the change,

Setting Timer Fig. 4

The TIMER (,,_o_j) pad controls the Timer feature. The Timer serves as an extra reminder in the kitchen that will beep when

the set time has run out. The Timer will not START or STOP the cooking process. The Timer feature may be used during any of the other oven control functions. Refer to the section "Minumum & Maximum Control Pad Settings" for available time amount settings.

INSTRUCTIONS PRESS DISPLAY

To set the Timer (example for 5 minutes):

1.	Press	_).	(See Fig. 5).
2.	Press	the number pads to set the desired time in the display					Fig. 5
	(example		Press _f_.	The timer	will begin a count
	down. (See Fig. 6).
	Note: If _		is not pressed the timer will		return to the time of		Fig. 6
	day.
.	When	the set time has run out,		the clock will sound with		3 long
	beeps	every 5 seconds until _oe_r-')is pressed (See Fig.				7).

To cancel the Timer before the set time has run out:

Press _r_. The display will return to the time of day. Fig. 7

17