Kenmore 790.7888, 790.7889 Surface Cooking, Care of the Griddle, Using the Griddle some models

Surface Cooking

Care of the Griddle

Before first use:

•Wash Griddle in hot soapy water, Rinse and then dry completely,

After each use: oStore in a dry place.

After each use, clean with hot soapy water. THE GRIDDLE iS DISHWASHER SAFE. Dry Immediately before storing.

_III!I_JW [ Jlllllllllllllllllllllllllllllll_

Using the Griddle (some models):

• Place the griddle centered over the Bridge Burner (some models). For location refer to Fig. 1. Preheat the griddle for 5 minutes on medium to medium low setting. Slow preheat ensures even heat distribution during the cooking process,

DO NOT preheat the griddle on HI setting. Preheat- ing on HI may warp the griddle and prevent even

heat distribution,

Fig. 1

To Set the Cooktop Lockout Feature (some models)

		iii
The _	pad is used to activate the Cooktop Lockout feature which will lock all gas surface burners from being operated.	..........iii

This feature will only lock the gas burners on the cooktop.

To turn the Cooktop Lockout Feature ON:

1.BE SURE ALL GAS SURFACE BURNER CONTROLS ARE SET TO THE OFF POSITION.

2.Press & hold @ until one beep is heard (after 3 seconds). The Cooktop Locked indicator light will turn ON and the gas surface burners and functions are locked out until the cooktop is unlocked,

To turn the Cooktop Lockout Feature OFF:

1.BE SURE ALL GAS SURFACE BURNER CONTROLS ARE SET TO THE OFF POSITION.

2.Press & hold @ until one beep is heard (after 3 seconds). The Cooktop Locked indicator light will turn OFF and the gas surface burners may be used normally,

TURN ALL GAS SURFACE CONTROL KNOBS TO OFF POSITION BEFORE UNLOCKING THE

COOKTOP -- To avoid a potential gas flow or fire be sure that ALL gas surface control knobs are set to the OFF position before unlocking or locking the cooktop.

IMPORTANT NOTE: Starting a Self-Clean cycle will automatically turn the Cooktop Lockout feature ON. The cooktop will remain locked after the Self=Clean cycle. Once the Self-Cleaning cycle has completed and the Door Locked Indicator Light has turned OFF, you MUST unlock the cooktop before the gas surface burners will operate.

11