Kenmore 790.7888, 790.7889 manual When the Self=Clean cycle is done

Self-Cleaning

•Setting Flex Clean

•Setting Delay Flex Clean

INSTRUCTIONS PRESS DISPLAY

When the Self=Clean cycle is done:

1.The time of day,"Not, DOOR LOCKED" and "CLEAN" icon will remain in the display (See Fig. 7).

2.Once the oven has cooled down for approximately 1 HOUR, and

the "DOOR LOCKED" icon is no longer displayed, the oven	Fig.7
door can then be opened.

Stopping or Interrupting a Self=Cleaning cycle:

If it becomes necessary to stop or interrupt a Self-Cleaning cycle due to excessive smoke or fire in the oven:

1.	Press_.
2.	Once the oven has cooled down for approximately 1 HOUR and
	the "DOOR LOCKED" icon is no longer displayed,the oven door	Fig.8
	can then be opened (Fig. 8).

IMPORTANT NOTES when using the Self-Clean feature:

iii...........

1. Do not use the surface burners after setting for a Self-Clean cycle.

..........iii

2.A Self=Clean cycle cannot be started if Oven Lockout feature is active.

3.If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly cleaned. Once power is restored, set for another Self-Clean cycle to finish.

4.If your clock is set for normal 12 hour display mode the Delay Self=Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 13 for instructions to set the control for the

24hour time of day display mode.

33