Setting Oven Controls
•Setting Convection Convert Feature
•Setting Add 1 Minute Feature
To set the Convection Convert feature
The _ | CONV CONVERT pad is used to automatically convert a standard Baking recipe for convection baking. When |
set properly, this feature is designed to display the oven set converted (reduced) temperature in the display.
Convection Convert MUST be used with a Convection Bake keypad. Cook Time or Delay Start functions may be added.
INSTRUCTIONS
Using Convection Convert feature to adjust oven temperature from a Bake recipe (example below when setting oven for 350°F):
1.Arrange interior oven racks and place food in oven.
2. Press _"), | (See Fig. 2). If a Cook Time or a Delay Start |
is desired, enter the times now.
3.Press cfoc_. "CONY BAKE" and the oven set temperature
adjustment will appear in the display (for this example it is 325°F). A beep will sound once the adjusted oven set temperature is reached. (See Fig. 3).
Notes: When used with a Cook Time or a Delay Start setting, the Convection Convert feature will display a "CF" for check food when the bake time is 75% complete (See Fig. 3). At this time the oven control will sound 3 long beeps at regular intervals until baking has finished. When the bake time has completely finished the control will display "End" and will sound 3 long
beeps every 30 seconds until the _ | pad is pressed (See Fig. |
4).
PRESSDISPLAY
Fig. 1
_r_t | Fig. 2 |
Fig. 3
Q | Fig. 4 |
The oven icon will show a rotating fan within the square. This rotating fan icon indicates when the Convection Fan is operating (See Figs 2 or 3)
Press ('_ to cancel Convection feature | at any time. |
| ® |
|
| ||
|
|
|
| ||||
Note: The minimum amount of cook time using the Convection |
|
|
|
| |||
Convert feature with a Cook Time or a Delay Start function is |
|
|
|
| |||
20 minutes. |
|
|
|
|
|
| |
To Set Add 1 Minute Feature |
|
|
|
|
| ||
The _ | keypad | is used to set additional | minutes to the Timer. | Each time | the _ | pad is pressed, | another minute is |
added. | If the Timer | is not active and the _ | key pad is pressed, | the Timer | feature | will become active | and will begin |
counting down from 1 minute. When the Timer reaches the end of the set time, "End" will display and signal 3 long beeps
at regular intervals until _ | is pressed again. |
28
