Self-Cleaning

Setting Flex Clean Setting Delay Flex Clean

INSTRUCTIONS

PRESS

DISPLAY

When the Self=Clean cycle is done:

1.The time of day,"DOOR LOCKED" and "CLEAN" icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened.

Stopping or Interrupting

a Self-Cleaning

cycle:

 

If it becomes necessary to stop or interrupt a Self-Cleaning cycle

 

duel.Press@.excessivet° smoke or fire

in the oven:

 

@

2. Once the oven has cooled

down for approximately 1 HOUR and

 

the "DOOR LOCKED" icon is no longer displayed,the oven door

Fig.7

can then be opened (See Fig. 7).

 

 

IMPORTANT NOTES when using the Self-Clean feature:

1.The Self-Clean feature will not operate whenever a radiant surface remains ON.

2.A Self-Clean cycle may be started if the appliance has the Cooktop Lockout active. A Self-Clean cycle cannot be started if Oven Lockout feature is active.

3.If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may be thoroughly cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.

4.If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 18 for instructions to set the control for the 24 hour time of day display mode.

34

Page 34
Image 34
Kenmore 790.7944, 790.7942 manual Stopping or Interrupting Self-Cleaning Cycle