Kenmore 790.9662 manual Setting Oven Controls, To set the Convection Convert feature, Instructions

Models: 790.9662

1 44
Download 44 pages 39.06 Kb
Page 28
Image 28
To set the Convection Convert feature

Setting Oven Controls

Setting Convection Convert Feature

Setting Add 1 Minute Feature

To set the Convection Convert feature

The _

CONV CONVERT pad is used to automatically convert a standard Baking recipe for convection baking. When

set properly, this feature is designed to display the oven set converted (reduced) temperature in the display.

Convection Convert MUST be used with a Convection Bake keypad. Cook Time or Delay Start functions may be added.

INSTRUCTIONS

Using Convection Convert feature to adjust oven temperature from a Bake recipe (example below when setting oven for 350°F):

1.Arrange interioroven racks and placefood in oven.

2.Press (_B° ) , (See Fig. 1). If a Cook Time or a Delay Start is desired, enter the times now.

3. Press _. "CONV BAKE" and the oven set temperature

adjustment will appear in the display (for this example it is 325°F). A beep will sound once the adjusted oven set temperature is reached. (See Fig. 2).

Notes: When used with a Cook Time or a Delay Start setting, the Convection Convert feature will display a "CF" for check food when the bake time is 75% complete (See Fig. 3). At this time the oven control will sound 3 long beeps at regular intervals until baking has finished. When the bake time has completely finished the control will display "End" and will sound 3 long beeps every 30

seconds until the Q pad is pressed (See Fig. 4).

The oven icon will show a rotating fan within the square. This rotating fan icon indicates when the Convection Fan is operating (See Figs 2 or 3)

Press (_ to cancel Convection feature at any time.

Note: The minimum amount of cook time using the Convection Convert feature with a Cook Time or a Delay Start function is 20 minutes.

PRESSDISPLAY

Fig. 1

"---t

Fig. 2

Fig. 3

Q

Fig. 4

@

To Set Add 1 Minute Feature

The _

keypad

is used to set additional

minutes to the Timer.

Each time the _

pad is pressed,

another

minute is

added.

If the Timer

is not active and the _

key pad is pressed,

the Timer feature

will become active

and will

begin

counting down from 1 minute. When the Timer reaches the end of the set time, "End" will display and signal 3 long beeps

at regular intervals until _d_r is pressed again.

28

Page 28
Image 28
Kenmore 790.9662 manual Setting Oven Controls, To set the Convection Convert feature, Instructions, Pressdisplay