Kenmore 790.9662 manual Before Setting Surface Controls COOKTOP, Before Setting Oven Controls

Before Setting Oven Controls

Baking Layer Cakes with 1 or 2 Oven Racks

For best results when baking cakes using 2 oven racks, place cookware on rack positions 2 (Flat Handle Oven Rack) & 5 with the Offset Oven Rack (See Fig. 6). For best results when using a single oven rack, place cookware on rack position 4 (See Fig. 7).

Air Circulation in the Oven

For best air circulation and baking results allow 2-4" (5-10 cm) around the cookware for proper air circulation and be sure pans and cookware do not touch each other, the oven door, sides

or back of the oven cavity. The hot air must be able to circulate around the

pans and cookware in the oven for even heat to reach around the food.

Fig. 6

Before Setting Surface Controls COOKTOP

• Locking& UnlockingtheCooktop		_ LOCKOUT
To Set the Cooktop Lockout Feature
The _	pad is used to activate the Cooktop	Lockout feature which will lock all surface

v

elements from being accidentally turned ON (including Warmer Zone). This feature will only lock the cooktop.

To turn the Cooktop Lockout Feature ON:

1. BE SURE ALL surface element controls are set to the OFF position.

2. Press and hold _'_ until a 2nd beep sounds. If a triple beep sounds instead, check

v

all surface elements and turn them to the OFF position and repeat this step. The Cooktop Locked indicator light will turn ON and the cooktop controls and functions are locked out until the cooktop is unlocked (See Fig. 1).

To turn the Cooktop Lockout Feature OFF:

1. BE SURE ALL surface element controls are set to the OFF position.

2. Press and hold _-Q-'_ until a 2nd beep sounds (after 3 seconds). If a triple beep sounds

v

instead, check all surface elements and turn them to the OFF position and repeat this step. The Cooktop Locked indicator light will turn OFF and the cooktop may be used normally (See Fig. 2).

Note: Starting a Self-Clean cycle will automatically turn ON the Cooktop Lockout feature. The cooktop will remain locked until the Self-Clean cycle has completed and the oven door has unlocked. If a power failure occurs after the Cooktop Lockout has been activated, you must turn OFF the Cooktop Lockout feature before being able to use the cooktop features again.

Fig. 7

Fig. 1

8