Self= Cleaning

Setting Flex Clean

Setting Delay Flex Clean

INSTRUCTIONS

PRESS

DISPLAY

When the Self-Clean cycle is done:

1.The time of day,"DOOR LOCKED" and "CLEAN" icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened.

Stopping or Interrupting a Self-Cleaning cycle:

If it becomes necessary to stop or interrupt a Self-Cleaning cycle due to excessive smoke or fire in the oven:

1. PressQ.

Q

2.Once the oven has cooled down for approximately 1 HOUR and

the "DOOR LOCKED" icon is no longer displayed,the oven door

Fig.7

can then be opened (See Fig. 7).

 

iMPORTANT NOTES when using the Self-Clean feature:

1.The Self-Clean feature will not operate whenever a radiant surface remains ON.

2.A Self-Clean cycle may be started if the appliance has the Cooktop Lockout active. A Self-Clean cycle cannot be started if Oven Lockout feature is active.

iii...........

iiiiiii:::¸J!i:::

3.If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may be thoroughly cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.

4.If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 17 for instructions to set the control for the 24 hour time of day display mode.

35

Page 35
Image 35
Kenmore 790.9662 manual Self= Cleaning, When the Self-Clean cycle is done, Stopping or Interrupting a Self-Cleaning cycle