HOW TO REMOVE AND iNSTALL THE PULL OUT
DRAWER (CONT.)
2. _nsaHIng PuH OUt Drawer
IMPORTANT: To avoid possible injury, product or property damage, you will need two people to perform the following instructions.
•With both hands, hold the center of the bar and pull it out to let both rails out to full extension simultaneously.
°Hook door supports into rail tabs.
/
F" ,^ Door Supports_
• Lower door into final position and tighten the screws.
Fig. 11
Screws
" Make sure you have the correct rail cover for each side.
f
Right
Rail cover
F,g12
" Align the top holes of the rail cover with the top holes of the door supports to assemble the rail cover.
f
Fig. 13
• Verify the hole's assembly.
Fig. 14 | _"'_ |
Fig. 15
•With the rails pulled out to fuji extension, insert the durabase in the rail assembly.
Fig. 16
[] WARNING: To prevent accidental child and pet entrapment or suffocation risk, DO NOT allow them to play inside of drawer.
[] WARNING: DO NOT step or sit down on Freezer Drawer.
14
