iNSTALLATiON iNSTRUCTiONS

Install the shutoff valve on the nearest frequently used drinking water line.

1. SHUT OFF THE MAIN WATER SUPPLY

Turn on the nearest faucet to relieve the pressure on the line.

2.CHOOSE THE VALVE LOCATION Choose a location for the valve that is

easily accessible. It is best to connect into the side of a vertical water pipe. When it is necessary to connect into a horizontal water pipe_ make the connection to the top or side_ rather than at the bottom_ to avoid drawing off any sediment from the water pipe.

3. DRILL THE HOLE FOR THE VALVE

Drill a 1/4" hole in the water pipe (even if using a seifpiercing valve) using a sharp bit. Remove any burrs

resulting from drilling the hole in the

pipe. Take care not to allow water to drain into the drill. Failure to drill a

1/4 " hole may result in reduced ice production or smaller cubes.

4.FASTEN THE SHUT OFF VALVE

Fasten the shutoff valve to the cold water pipe with the pipe clamp.

Pipe Clamp

Saddle-Type

JJ_

Vertical

Cold

Shutoff Valve

 

 

Water

Pipe

 

 

NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves

are illegal and use is not permitted in Massachusetts. Consult with your licensed plumber.

5.TIGHTEN THE PIPE CLAMP

Tighten the clamp screws until the sealing washer begins to swell.

NOTE: Do not over tighten or you may crush the tubing.

 

 

Washer

Pipe

Clamp

-Jlnlet

End

 

 

Clamp

Screw

 

 

6.ROUTE THE TUBING

Route the tubing between the cold water line and the refrigerator.

Route the tubing through a hole drilled in the wall or floor (behind the refrigerator or adjacent base cabinet)

as close to the wail as possible.

NOTE: Be sure there is sufficient extra tubing (about 8 feet

coiled into 3 turns of about 10 inches in diameter) to allow the

refrigerator to move out from the wall after installation.

7. CONNECT THE TUBING TO THE VALVE

Place the compression nut and ferrule (sleeve) for copper tubing onto the end of the tubing and connect it to the shutoff valve. Make sure the tubing is fully inserted into the valve. Tighten the compression nut securely.

Saddle-Type

Compression

Shutoff Valve

Nut

Packing

--

Nut

 

Outlet

Ferrule (sleeve)

Valve

 

NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves

are illegal and use is not permitted in Massachusetts. Consult with your licensed plumber.

28

Page 27
Image 27
Kenmore 795.7130 manual Shut OFF the Main Water Supply, Drill the Hole for the Valve, Fasten the Shut OFF Valve

795.7130 specifications

The Kenmore 795.7130 refrigerator is a versatile and innovative appliance designed to meet the needs of modern households. With its sleek design and a host of advanced features, this refrigerator not only stands out in aesthetics but also in functionality.

One of the standout characteristics of the Kenmore 795.7130 is its spacious interior. With a generous capacity, it is ideal for families or anyone who needs to store a significant amount of food and beverages. The refrigerator section usually includes adjustable shelves, which allow for flexible storage options. The shelves are often designed to accommodate tall bottles and large containers, making organization a breeze.

The model also features advanced cooling technologies aimed at preserving freshness. The dual evaporator system is a key component, ensuring that the refrigerator and freezer maintain optimal humidity levels. This not only keeps food fresh for longer but also prevents the transfer of odors between the two compartments. Additionally, the refrigerator typically includes a linear compressor that enhances energy efficiency and reduces noise, providing a quieter kitchen environment.

For ice and water enthusiasts, the Kenmore 795.7130 often comes equipped with an in-door ice maker and a water dispenser, making it easy to access chilled water and ice cubes. The water filtration system ensures that the water is clean and free from impurities, providing peace of mind for health-conscious users.

Another notable feature is the temperature management system. Many models include adjustable temperature controls and quick cool settings, which allow users to rapidly cool food items when needed. The built-in digital display makes it easy to monitor and adjust settings without hassle.

The Kenmore 795.7130 also emphasizes energy efficiency, often meeting or exceeding ENERGY STAR certification. This not only helps reduce energy bills but also contributes to a more sustainable household.

In terms of design, this refrigerator typically showcases a modern stainless-steel finish that complements a variety of kitchen styles. The sleek, fingerprint-resistant surface also ensures that the appliance maintains a clean appearance over time.

In conclusion, the Kenmore 795.7130 is a solid choice for anyone seeking a reliable refrigerator that combines style and functionality. With its spacious interior, advanced cooling technologies, and energy-efficient design, it is well-suited to accommodate the demands of everyday life.