REMOVING AND REPLACING
REFRIGERATOR DOORS
To remove the left refrigerator door:
Pull the water tube out of the fitting while pressing the release ring on the fitting.
When you pull out the tube, first you have to push the collet by opposite direction of arrow in the upper picture and tube pull out by direction of arrow.
_b,CAUTION: Before you begin, remove food and bins from the doors.
•Open the door. Remove the top hinge cover screw (1).
•Use a
Lift up the cover.
•Remove the cover. Pull out the tube (3).
•Disconnect all the wire harnesses (4).
•Remove the grounding screw(5)
•Rotate hinge lever (6) counterclockwise and remove. Lift the top hinge (7) free of the hinge lever latch (8).
iMPORTANT: When lifting the hinge free of the latch, be careful that the door does not fall forward.
•Lift the door from the middle hinge pin and remove the door.
•Place the door, inside facing up, on a nonscratching surface.
To remove the right refrigerator door:
f
•Open door.Loosen top hinge cover screw (1).Lift up cover (2).
•Remove cover.
•Disconnect wire harness (4).Remove the grounding screw (5).
•Rotate hinge lever (6)clockwise and remove.Lift top hinge (7)free of hinge lever latch (8).
iMPORTANT: When lifting the hinge free of the latch, be careful that the door does not fall forward.
Explosion Hazard
•Disconnect electrical supply to the refrigerator before installing. Failure to do so could result in death or serious injury.
•Do not put hands or feet or other objects into the air vents, base grille, or bottom of the refrigerator. You may be injured or receive an electrical shock.
•Be careful when you work with the hinge, base grille, and stopper. You may be injured.
15
