TILT-OUT DOOR BASKET
To remove basket
1.Pull one of the brackets upward.
2.Remove basket from both brackets.
To replace basket
1.Insert bracket into one side. Hook end of basket into bracket.
2.Hook other basket end into other bracket. Push bracket down into place.
3.Be sure back of basket goes behind retention tab on each bracket.
FREEZER DRAWER BIN
1.To remove the Durabase, push it back to the end as much as possible. Tilt up the front of the Durabase and pull straight out.
2.To install, insert the Durabase in rail assembly.
FREEZER DRAWER BIN DIVIDER
The Durabase divider allows you to organize the Durabase area into sections.
1.To remove, pull the divider straight up.
2.To install, hook the top corners of the divider over the top edge of the durabase.
A WARNING: When the divider of the freezer drawer is removed, children may crawl inside.
PULL OUT DRAWER
To separate the drawer, push the front left and right hooks in C) direction to pull up and remove.
Then gently lift the gear part of rear left and right side of the drawer and pull it out in (_ direction.
To install, reposition the gear part of rear left and right side of the drawer after pulling out both rails as much as possible, and gently push down both left and right side while checking the hook on the front part.
J
26
