II
TIME AND STATUS DISPLAY
The Time and Status Display shows the estimated time remaining, cycle progress, and vent status. When the dryer is turned on, the display will illuminate.
|
| Normal | Workout Wear | |
|
| Bulky/Bedding | Small | Load |
MoreTime | _ | Casual | Delicates | |
|
| |||
Less Time | Wrinkle Guard | Heavy Duty | Express | Dry |
|
| |||
POWER |
| Towels | Touch | Up |
|
|
| _TART! PAUSE | |
O ESTIMATED TIME REMAINING
When a cycle is selected, the display will indicate the default time for that cycle. Once the cycle is started, the estimated time will be displayed. This displayed time may fluctuate during the cycle depending on the conditions of the load in the dryer.
(_) LINT FILTER INDICATOR
The dryer automatically detects reduced airflow caused by a full lint filter. The Check Lint Filter indicator will light before each load as a reminder to check the lint filter before starting each load for maximum efficiency. Always clean the lint filter before every cycle.
CYCLE STATUS INDICATOR
This portion of the display shows which stage of the drying cycle is currently underway (DRYING or COOLING).
_) CHIME
Adjusts the volume of the chime or turns off the chime. Press the button repeatedly until the desired sound level is reached.
(_ CHECK VENT INDICATOR
(DUCT BLOCKAGE SENSING SYSTEM)
The CHECK VENT duct blockage sensing system detects and alerts you to serious blockages in the ductwork that reduce exhaust flow from the dryer.
This light does not indicate any problems with your dryer. If this light blinks, it indicates that your home's exhaust system has a serious restriction, which is not covered by your dryer's warranty. Call
CONTROL LOCK INDICATOR
When Control Lock is set, the Control Lock indicator will appear and all buttons are disabled except the ON/OFF button. This prevents children from chang- ing settings while the dryer is operating.
_) ADD WATER INDICATOR
If the steam feeder runs low on water, the ADD WATER light will flash and the cycle will be can- celled. Refill the steam feeder and then restart the cycle. See page 27 for information on filling the steam feeder.
23
II
