Kenmore 88963 manual HI-POWER/MULTI-POWER Cooking, Remove metal rack. place ceramic tray in oven

"HI-POWER"/"MULTI-POWER" COOKING

"HI" gives the highest cooking power possible with your oven,+It is the recommended setting for cooking foods with high

mols tqre content or for cooking foods that need fast cooking to maintain their natural flavor and texture+ Many foods need slower cooking (at less than full power) in order to give you the best results. In addition to"HI" there are ninety-nine

multi-power settings+ The cookbook tells you which power setting is recommended for the food being cooked,

To Cook

(Remove metal rack. place ceramic tray in oven.)

1.Touch CLEAR, and a beep tone will be heard. The CLEAR erases all previous settings, Place food in oven, then dose the door.

2, Touch MICRO TIME. The lights above TIME and MICRO, below COOK 1 _l! 9o on+("0" _[l show in

the display window+)

3+ Touch the correct numbers on the control panel to set the cooking time_ The time set wgl show in the

display window at the top oithe control panel For example:

o To set 30 seconds, you woutd touch "3" and then

. To set 3 minutes, touch "3", "0" and "0".

= To sat 3-1/2minutes, touch "3", "3" and "0"+

Remember, the timer is a digital clock that is divided

into 60 seconds Therefore, I/2 minute is equal to 30

seconds. Touch 30 and not 50 (as with a catcutator_ to indicate 1/2

4.Touch MICRO POtArER. The lights above MICRO and below COOK 1 will go on. Also, the word "Hi" will show in the display window until a lower setting is entered This is to tell you that the oven will be operating on "HI" unless a different power setting is chosen,

5° Touch numbers for desired cooking power level. For example, if the recipe calls for cooking at the "20

(LOW)" setting, you would touch"2" and "0". The display' window_IIshow "20':Th_smeans that

the LOW setting, the oven is cooking at power level 20

NOTE: It is not necessary to touch MICRO POWER when cooking with the highest power ("Hi")+ To set

"HI-POWER" cooking,skipsteps4 and5 above,

However, if MICRO POWER is touched, thelight above MICRO wfflgo on and the word "HI" _ show in the display window+This is to let you know that the oven willbe operatingon "HI" power unlessa different power setting is chosen,

6+ Touch START., The oven begins to cook and the

display window will show the time counting down. A tone will sound and the word "End" will show in

the display window for two seconds when the

cooking time is completed+ Then the oven _ shut itself off.

20

EXAMPLE: To warm 4 doughnuts, you would cook at power level 80 or "80 (REHEAT)" for 35 seconds. To

do this, follow these six steps.

1.Touch CLEAR,

2.Touch MICRO TIME,

Place doughnuts in oven, then close the door,

3_ Set 35 secondsby touching __ "3" and then "5". "35" will

show in the display window.

4. Touch	MICRO POWER.	'_--.___.-.
'The display window will show
5. Choose	the "B0 (REHEAT)"	_
setting by touching the num-
bers "8" and "0"o The display
window will show "80". This
means the oven is cooking at
power	level80+

6, Touch START. The oven

begins to cook and the time will begin to count down in

the display window,,

A tone will sound and the word "End" will show in the

display window for 2 seconds when the 1-1/2 minutes are

over,, Then the oven v_ll shut itself off,.

NOTE: If you want to keep the

food warm after finishing the cooking,you can use "Hold Warm" feature. For detaged

instructions on using "Hold

Warm" feature,see page 16,