TEMPERATURE CONTROLLED
"HI-POWER'y"MULTI-POWER" COOKING
Tl_e "Temperature.Controlled Meat Cooking Guide" and ""Reheating Guide" on Pages 22 and 23 will show
you which multi.power setting and temperature setting are recommended for the food you are cooking. When cooking with the temperature control settings, the timer is not used_
1.Place the temperature probe into the food with the first inch of the sensor in ihe center of the food..
The probe should be in a level direction or on an
angleasshown° ItshouM
NOT be put in from the top°
2.Plug the temperature
probe into the socket on the side of the oven, CAUTION: Do not plug the pointedend of the
7_ Choose the power control setting you desire and touch the corresponding 9umbers_ For examgte, if the recipe should _ for cooking at the "70 (ROAST)" setting, you would touch numbers "7" and
When you touch "7" and "0",
the displax? window will showtZZXl__ _
"70". This!means that in the
"70 (ROAST)" setting, the oven is at power level 70_
temperature probe into
the sockeL
3.Touch CLEAR.
4.Touch MICRO TEMP.
The lights above TEMP and M]CRO, below COOK t will go on, and "F" wi_[tshow in the display window.
5.Choose the food temperature and touch the corresponding numbers. For exam#e, if the recipecalls for doneness at
165° F, you would touch numbers "1" "6" and "5".
When you touch "165", the display windowwillshow "t65F"., If the temperature probe is not pluggedinto the
socket, the word "Prob" will flash and the oven willnot
work. | _ | _ | C]Z3 |
NOTE: The highest tempera* ture that can be set is 185°E
NOTE: You do not need to touch MICRO POWER when you ate cooldng with H] (max power)° To set "HI..POWER" Cooking, skip steps 6 and 7
above. However, if MICRO POWER is touched, the light above MICRO will 9o on and the word "HI" wi_] show in the
display winddw. This is to teU
you that the oven willwork at HI
(highest microwave Power)
unless a different power setting is
chosen.
8+ Touch STiM_T_The oven will begin to cook and you will be
able to see the"temperature of the food rising in the display v_ndow,
,A tone wilI sound and the word "End" will show in the display wipdow for 2 seconds when the desired temperature is reached.
:_L____
6.Touch MICRO POWER. The word "H!" wil!show in
the display window until you enter a lower power setting. This is to remind you that the oven will always operate at full power unless you set a lower power
.,.==..=- _
NOTE: if you want to keep the food warm after finishing the :set cooking, you can use "Hold Warm" feature,. For detailed instructions on using "Hold Warm" feature, see page 16.
24
