9.TouchSTART,Thefirst stagewillbegin, "700" will
show in the Display Window. The Oven will begin cooking at ,50 (SIMMER) and the time will be counting down in the Display Window. When the
7 minutes are up, a tone will
sound and the Oven will change itself into the second stage. Tile Oven will begin cooking at HI. When the 3 minutes are up, a tone will sound and the Oven will shut
itself off. The Oven has finished both stages.
Note: When Temperature Control
Cooking is set in the second stage, the Oven will switch into Hold Warm
after cooking. The Hold Warm will
continue for 60 minutes after tile food
reaches the chosen temperature, or until the Door is opened or STOP is touched.
WHOLE MEAL COOKING
(See Cookbook for detailed explanation)
Whole Meal Cooking lets you cook two or more different foods at the same time. Foods need not be placed in the Oven at the
same time, nor be removed at the same time, unless needed. By
using PAUSE rather than MEMORY/RECALLthe Oven will stop be'0,veen stages [or time to add or remove food,
I. Place the Metal Rack in the Oven. Be sure the shelf bracings are on the top as shown below. The Rack is generally placed in top guides but may be set lower to accomodate a higher cooking utensil, if desired.
DELAY START COOKING
Delayed cooking can be done by using the
I. Touch CLEAR.
2.Touch TIME.
3.Touch numbers for Delay Time.
4.Touch COOK CONTROL.
5.Touch "0" (0% of cooking power).
6.Touch MEMORY/RECALL.
7.Touch TIME or TEMP CONTROL.
8.Touch numbers for Cooking Time or Temperature.
9.Touch COOK CONTROL.
I0. Touch numbers for Cooking Power level, I I. Touch START.
2.Place food into the Oven.
3.Set the Oven following the instructions given in the cookbook.
METAL RACK
[] Remove Metal Rack from Oven when not being used for cooking.
[] Do not use the Oven empty with the Metal Rack in it.
[] The Metal Rack may get hot during cooking, Pot holders may be needed to remove Rack after cooking.
[] Do not use browning dishes on Metal Rack.
Metal Rack
21
