REFRIGERATOR INSTALLATION
HOW TO REPLACE THE FREEZER DRAWER
With both hands, pull out the center bar until the rail is fully extended.
NOTE: Make sure that the left and right rail covers are attached to the correct rails. See picture below.
Hook the door support into the rail tabs on both sides.
1
2
Lower the drawer into its fiinal position and tighten the screws 3 .
3
Align the tabs on the covers with the assembly holes on each rail and snap the rail covers in place to secure.
Right Rail
Cover
Left Rail
Cover
With the drawer pulled out to full extension, insert the lower basket 4 in the rail assembly.
4
WARNING: If the Durabase divider is removed, there is enough open space for children or pets to crawl inside. To prevent accidental child and pet entrapment or suffocation risk, DO NOT allow them to touch or go near the freezer drawer.
WARNING: DO NOT step or sit down on freezer drawer.
Assembly Hole
16
