•PressandholdLOCKfor3secondstolockthedispenser.

•PressandholdLOCKasecondtimetounlockthedispenser.

Thedisplayscreenindicateswhenthedispenserlocked.

locked unlocked

LOCKED UNLOCKED

The water filter status light will help you know when to change your water filter. When the water filter status display changes from "GOOD" to "ORDER," this tells you that it is almost time to change the water filter cartridge. Replace the water filter cartridge when the water filter status display changes to "REPLACE." If water flow to your water dispenser or ice maker decreases noticeably, change the filter sooner. The filter should be replaced at least every 6 months depending on your water quality and usage. To change the filter, see "Water Filtration System."

INDICATOR:

STATUS:

NEW or GOOD (green)

New filter installed

ORDER (yellow)

Order filter

REPLACE (red) OR

Replace water filter

when water flow decreases

 

After changing the water filter, reset the status light by pressing and holding the FILTER button for 3 seconds. The status light will change from Replace (red) to New/Good (green) when the system is reset.

A. Eject button

B. Filter cap

2.Remove the cap by turning it counterclockwise until it stops. IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter.

3.Take the new cartridge out of its packaging and remove the covers from O-rings.

A.Cover B. O-ring

Style 1

Style 2

 

Place the cap (removed in Step 2) on the new filter. Align the

ew

GOOD

4.

 

 

ridge on the cap with the arrow on the filter. Turn the cap

good

ORDER

 

clockwise until it snaps into place.

order

 

 

replace

REPLACE

 

 

PRESS & HOLD

 

 

 

TO RESET

Filter Status

 

 

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Changing the Water Filter

The water filter is located in the base grille below the freezer compartment door. It is not necessary to remove the base grille to remove the filter.

1.Remove the filter by pressing the eject button and pulling straight out on the filter cap.

NOTES:

•Avoid twisting the cap when removing the filter because this could cause the cap to come off. If this occurs, replace the cap and pull the filter straight out.

A.Eject button

B.Arrow on filter

C.Ridge on cap

5.Push the new filter into the opening in the base grille. As the filter is inserted, the eject button will depress. The eject button will pop back out when the filter is fully engaged.

6.Pull gently on the cap to check that the filter is securely in place.

7.Flush the water system. See "Flushing the Water System After Changing Filter."

13

Page 12 Page 14
Page 13
Image 13
Kenmore W10215709A manual Locked unlocked, Filter Status, Changing the Water Filter
Page 12 Page 14

W10215709A specifications

The Kenmore W10215709A is a high-quality refrigerator water filter designed to enhance the taste and safety of drinking water. It is specifically compatible with a range of Kenmore refrigerators that utilize a twist-and-lock filter mechanism. This filter is engineered to reduce contaminants, ensuring that consumers enjoy clean and refreshing water and ice straight from their refrigerator.

One of the main features of the Kenmore W10215709A is its advanced filtration technology. This filter employs a multi-stage filtration process that targets a wide spectrum of harmful substances that can be present in tap water. It effectively reduces chlorine, lead, mercury, and other heavy metals, along with various contaminants that can negatively affect water quality. This results in water that not only tastes better but is also healthier for household consumption.

The Kenmore W10215709A boasts a filter life of about six months, depending on usage and water quality. This means that users can enjoy considerable longevity before needing to replace the filter, providing both convenience and cost-effectiveness. The installation process for this filter is straightforward, featuring a simple twist-and-lock design that allows users to change the filter without any tools. This ease of use ensures that maintaining the filter does not become a cumbersome task and encourages users to prioritize water quality.

This model is also designed with user-friendly indicators in mind. Many compatible refrigerators are equipped with built-in filter change lights that notify users when it is time to replace the filter, making it easy to keep track of filter performance without prior knowledge of water filter maintenance.

In terms of characteristics, the Kenmore W10215709A meets the strict standards set by the NSF, assuring consumers of its efficacy and safety. It offers an environmentally friendly solution, as it minimizes the need for bottled water, promoting a greener lifestyle.

In summary, the Kenmore W10215709A water filter is an excellent choice for Kenmore refrigerator owners. With its advanced filtration capabilities, user-friendly features, and commitment to quality, it ensures that families can enjoy superior water straight from their ice and water dispensers. This filter embodies the blend of convenience and health that modern consumers demand while promoting safer drinking water.
Top Page Image Contents