_J_:,_,_ _;_ _

Temperature is too warm

•New installation? Allow 24 hours following installation for the refrigerator to cool completely.

•Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

•Large load of food added? Allow several hours for refrigerator to return to normal temperature.

•Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See "Using the Controls."

The ice maker is not producing ice or not enough ice

•Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

•Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

•Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

•New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

•Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

•Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

•Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See "Water Supply Requirements."

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

•Water shutoff valve not fully open? Turn the water shutoff valve fully open.

•Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

•Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See "Water Supply Requirements."

•Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

Odor transfer from food? Use airtight, moisture-proof packaging to store food.

_ '_,_i_,,#l __

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

•Humid room? Contributes to moisture buildup.

•Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

•Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

•Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration

system needs additional flushing.

The ice dispenser will not operate properly

•Freezer door closed completely? Close the door firmly. If it does not close completely, see "The doors will not close completely."

•Ice bin installed correctly? Be sure the ice bin is firmly in position.

•New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

•Ice stuck in the delivery chute? Use a plastic utensil to clear the delivery chute.

•Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

•Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

•Is the ice dispenser stalling while dispensing "crushed" ice? Change the ice button from "crushed" to "cubed." If cubed ice dispenses correctly, depress the button for "crushed" ice and begin dispensing again.

•Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

22

Page 21 Page 23
Page 22
Image 22
Kenmore W10215709A manual Ice maker is not producing ice or not enough ice, Ice cubes are hollow or small
Page 21 Page 23

W10215709A specifications

The Kenmore W10215709A is a high-quality refrigerator water filter designed to enhance the taste and safety of drinking water. It is specifically compatible with a range of Kenmore refrigerators that utilize a twist-and-lock filter mechanism. This filter is engineered to reduce contaminants, ensuring that consumers enjoy clean and refreshing water and ice straight from their refrigerator.

One of the main features of the Kenmore W10215709A is its advanced filtration technology. This filter employs a multi-stage filtration process that targets a wide spectrum of harmful substances that can be present in tap water. It effectively reduces chlorine, lead, mercury, and other heavy metals, along with various contaminants that can negatively affect water quality. This results in water that not only tastes better but is also healthier for household consumption.

The Kenmore W10215709A boasts a filter life of about six months, depending on usage and water quality. This means that users can enjoy considerable longevity before needing to replace the filter, providing both convenience and cost-effectiveness. The installation process for this filter is straightforward, featuring a simple twist-and-lock design that allows users to change the filter without any tools. This ease of use ensures that maintaining the filter does not become a cumbersome task and encourages users to prioritize water quality.

This model is also designed with user-friendly indicators in mind. Many compatible refrigerators are equipped with built-in filter change lights that notify users when it is time to replace the filter, making it easy to keep track of filter performance without prior knowledge of water filter maintenance.

In terms of characteristics, the Kenmore W10215709A meets the strict standards set by the NSF, assuring consumers of its efficacy and safety. It offers an environmentally friendly solution, as it minimizes the need for bottled water, promoting a greener lifestyle.

In summary, the Kenmore W10215709A water filter is an excellent choice for Kenmore refrigerator owners. With its advanced filtration capabilities, user-friendly features, and commitment to quality, it ensures that families can enjoy superior water straight from their ice and water dispensers. This filter embodies the blend of convenience and health that modern consumers demand while promoting safer drinking water.
Top Page Image Contents