NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

A

B

C

D

E F

G

A. Refrigerator water tubing

 

E. Ferrule (purchased)

B. Nut (provided)

 

 

F Nut (purchased)

C. Bulb

 

 

 

G. Household water line

D. Coupfing (purchased)

 

 

 

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Style 3

1.Unplug refrigerator or disconnect power.

2.Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator.

3.Thread the provided nut onto the water valve as shown. NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

A

B

Complete the Installation

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Flush the water system. See "Prepare the Water System" or "Water and Ice Dispensers."

NOTE: Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container.

A.Bulb

B.Nut (provided)

Please read before using the water system.

Immediately after installation, follow the steps below to make sure that the water system is properly cleaned.

1.Open the freezer door and turn off the ice maker. The On/Off switch is located on the top right side of the freezer compartment. Move the switch to the OFF (right) setting as shown.

NOTE: Make sure the base grille filter is properly installed and the cap is in the horizontal position.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

2.Use a sturdy container to depress and hold the water dispenser lever for 5 seconds, then release it for 5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser lever

(5 seconds on, 5 seconds off) for an additional 5 minutes. This will flush air from the filter and water dispensing system. Additional flushing may be required in some households.

NOTE: As air is cleared from the system, water may spurt out of the dispenser.

3.Open the freezer door and turn on the ice maker. Move the switch to the ON (left) position. Please refer to the "Ice Maker and Storage Bin" section for further instructions on the operation of your ice maker.

•Allow 24 hours to produce the first batch of ice.

•Discard the first three batches of ice produced.

•Depending on your model, you may want to select the maximum ice feature to increase the production of ice.

9

Page 8 Page 10
Page 9
Image 9
Kenmore W10215709A manual Complete the Installation, Coupfing purchased
Page 8 Page 10

W10215709A specifications

The Kenmore W10215709A is a high-quality refrigerator water filter designed to enhance the taste and safety of drinking water. It is specifically compatible with a range of Kenmore refrigerators that utilize a twist-and-lock filter mechanism. This filter is engineered to reduce contaminants, ensuring that consumers enjoy clean and refreshing water and ice straight from their refrigerator.

One of the main features of the Kenmore W10215709A is its advanced filtration technology. This filter employs a multi-stage filtration process that targets a wide spectrum of harmful substances that can be present in tap water. It effectively reduces chlorine, lead, mercury, and other heavy metals, along with various contaminants that can negatively affect water quality. This results in water that not only tastes better but is also healthier for household consumption.

The Kenmore W10215709A boasts a filter life of about six months, depending on usage and water quality. This means that users can enjoy considerable longevity before needing to replace the filter, providing both convenience and cost-effectiveness. The installation process for this filter is straightforward, featuring a simple twist-and-lock design that allows users to change the filter without any tools. This ease of use ensures that maintaining the filter does not become a cumbersome task and encourages users to prioritize water quality.

This model is also designed with user-friendly indicators in mind. Many compatible refrigerators are equipped with built-in filter change lights that notify users when it is time to replace the filter, making it easy to keep track of filter performance without prior knowledge of water filter maintenance.

In terms of characteristics, the Kenmore W10215709A meets the strict standards set by the NSF, assuring consumers of its efficacy and safety. It offers an environmentally friendly solution, as it minimizes the need for bottled water, promoting a greener lifestyle.

In summary, the Kenmore W10215709A water filter is an excellent choice for Kenmore refrigerator owners. With its advanced filtration capabilities, user-friendly features, and commitment to quality, it ensures that families can enjoy superior water straight from their ice and water dispensers. This filter embodies the blend of convenience and health that modern consumers demand while promoting safer drinking water.
Top Page Image Contents