Kenmore Washer/Dryer owner manual Using the Liquid Fabric Softener Dispenser

•Start the washer. Bleach will be diluted

automatically before it comes in contact with the wash load.

NOTE: Do not use this dispenser to add powdered chlorine or color-safe bleach to your wash load. The dispenser is for liquid chlorine bleach only.

-oO-oO_ooO-oOUV				Liquid
°oO°oO°		o °° o	/
o	o	o o		chlorine
o	o o o	o °
o o	o C,			bleach
				dispenser

°° o_°C' o°

USING THE LIQUID FABRIC

SOFTENER DISPENSER

After loading the washer, measure and add the recommended amount of fabric

softener into the dispenser. Follow manufacturer's directions.

NOTE: Pouring too much fabric softener into the dispenser will cause the fabric softener to dispense instantly into the load due to siphoning action. This instant "dump" could damage fabrics and will make it appear that your dispenser is not working correctly.

•Add warm water to fill the dispenser until it reaches the crossed opening at the bottom of the funnel-shaped portion of the dispenser.

•Fabric softener is dispensed into the first deep rinse water automatically.

NOTE: Fabric softeners are net com-

patible with detergents. This dispenser should never be used in the PFIEWASH

Cycle since it would dispense fabric'- softener into a wash load that has not

been rinsed. Undiluted fabric softener

spilled on fabric may result in spots that look like oil stains.

If you ever use your dispenser this way by mistake, rewash the load with extra detergent tc remove these deposits.

To Remove and Clean the

Fabric Softener Dispenser

STEP 1. Grab the dispenser with both

hands. Squeeze and push upward with thumbs.

STEP 2. Flush the dispenser with warm water

STEP 3. Replace dispenser after cleaning.

Liquidfabricsoftener dispenser

43