Kenmore Washer/Dryer owner manual Parts Needed, If making a direct wire connection Tools Needed

B. MAKE ELECTRICAL CONNECTION (pgs. 16-26)

Hold-downscrew

Terminalblockcover

If using a power cord:

Tools Needed:

1h-inch	nut	#2 Phillips head
driver (shown)		screwdriver
or socket	wrench

Parts Needed:

_I _ Strain relief

New 3- or 4-wire, 30-amp. U.L.-listed power supply

cord kit (includes strain relief)

Flashlight (optional depending on installation)

If making a direct wire connection:
Tools Needed:	Parts Needed:

1/4-inch nut	#2	Phillips head
driver (shown)		screwdriver					3/4-inch,
or socket wrench			10-gauge,		3- or 4-wire,
							U.L.-listed,
			flexible		armored
			or	non-metallic			strain relief
			sheathed		copper	cable
			(with	grounding		wire)
Wire stripper	Flashlight		(optional
	depending	on	installabon)