Kenmore Washer/Dryer Determine Vent Length Maximum Exhaust Lengths, Exhaust Hood PtPE, 35 ft

This laundry center may be converted to exhaust out the right or left side. To convert the laundry center, the following kits MUST be used.

Side Exhaust Kit No. 3391335 (white) Side Exhaust Kit No. 3391336 (almond)

Follow the instructions in the kit to

avoid operational and personal hazards. These kits are available at your local Sears store or Sears Service Center.

Typical installations for left or right side exhausting

NOTE: Avoid pushing the laundry center tightly against a wall. This can crush or kink the vent. Use the straightest path you can, where possible, to avoid 90 ° turns.

DETERMINE VENT LENGTH Maximum Exhaust Lengths:

•Rear ExhausL The maximum length of the rear exhaust system depends on the type of vent, the number of

elbows and the type of exhaust hood. Refer to the chart below.

•Side Exhaust. Side exhaust adds

a 90° turn inside the laundry center. To determine maximum exhaust

length, add one 90 ° turn to the chart.

EXHAUST HOOD "Pt'PE

--F

Number of Maximum length of 4-inch 90° Turns diameter rigid heavy metal vent.

0	42	ft.	40	ft.	35 ft.
1	34	ft.	32	ft.	27 ft.
2	26	ft.	24	ft.	19 ft.

Number of	Maximum length of 4-inch
90';Turns	diameterflexible heavy metalvent.
0	;.>6ft.		_ 25ff.	20 ft.
1	.1	ft.	21 ft.	16 ft.
	t)		115 ft.
2	r6	ft.		10 ft.

33