Kenmore WI0151336A manual oo B, Drop-InDoor Rails To Remove and Replace the Rails, Notes

Drop-In Door Rails

To Remove and Replace the Rails:

1.Remove the rails by pulling straight up on each end of the rail.

2.Replace the rails by sliding the shelf rail into the slots on the door and pushing the rail straight down until it stops.

To Remove and Replace the Bin Parts:

1.Press either release button to open the tilt-out portion of the bin.

A

I

m,-t

©oo B A. Release buttons

To Remove and Replace the Bins:

1.Remove the bin by lifting it and pulling it straight out.

2.Replace the bin by sliding it in above the desired supports and pushing it down until it stops.

2.To remove the tilt-out portion of the bin, press m on the curved levers on each side of the bin, Pull up and out.

NOTES:

•The bin can not be removed if it is tilted out all the way. Tilt it only part of the way before pressing the curved levers to remove it,

•Clean the parts as instructed in the "Cleaning" section.

To Remove and Replace the Bin:

1.Remove the bin by lifting it and pulling it straight out,

2.Replace the bin by sliding it in above the desired supports and pushing it down until it stops,

A. Curved lever

3.Reinstall the tilt-out portion of the bin. Be sure it is properly seated in the bottom of the bin before inserting the curved levers into position,

4.Replace the interior parts of the bin.

C

A. Strainer basket

B.Dividers

C.Strainer mat

17