Procedure Up to Projection

1Consideration of placement location and screen size

Determine the screen and projector setup location.

Set the projector on a strong and stable, level platform.

See Page E-15 for information about the projection distance and screen size.

2Connections with input equipment

Connect your personal computer/video equipment.

Connections with the Personal Computer → See Page E-16

Connections with the Video Equipment → See Page E-20

3Connect the power cable and switch on the power

Switch On the Power → See Page E-21

Switch Off the Power → See Page E-21

4Switch on the power of the personal computer or video equipment

5Properly adjust the projection image to the screen

→See Page E-15

Perform the tilt adjustment of the projector to provide the desired projection height.

6

7

The tilt adjustment allows the position of the projection image to be raised and lowered. The adjustment angle is from 0 degrees to 6 degrees.

Tilt adjustment → See Page E-22

Select the input equipment

→See Page E-23

Adjust the image or video

Adjust the image to provide the optimum condition, as required.

→See Page E-37 - E-40

E-14