Connection of the Power Cable and On/Off Switching
Switch On the Power
1Connect the power cable
The projector will enter the standby mode and the ON/STANDBY LED will light in red.
POWER | INPUT |
ON/STANDBY |
|
LAMP/COVER |
|
TEMP |
|
TEST
RGB
S
V
L
R
AUDIO
USB
To wall outlet.
TE P | PO |
| WER |
INPUT |
|
|
PORT |
| |
T | RAIT | FREEZE |
RANS |
| |
FER |
| OFF |
|
| FREEZE |
2Press the POWER button (
)
Operation with the | Operation with the |
Projector | Remote Control |
The fan will turn, the lamp will light, and the ON/STANDBY LED will light in green. The LAMP/COVER LED will light in green.
• If the LED lights in red after the POWER button is pressed, projector |
trouble is indicated. |
ON/STANDBY
LAMP/COVER
TEMP
POWER
→ See Page |
• Check that the lens cap has been removed before pressing the POWER |
button. |
The projector is now able to make a projection.
3Switch on the power of the connected equipment
Switch Off the Power
1 | Press and hold the POWER button ( ) for 1 second or longer | Operation with the | Operation with the |
| "Press POWER button again to turn off" will appear on the projection screen. | Projector | Remote Control |
|
|
| |
2 |
| POWER |
|
Press the POWER button ( ) one more time. | ON/STANDBY |
| |
LAMP/COVER |
| ||
|
| TEMP |
|
The lamp will go off.
• The lamp/cover LED flashes green, then turns off once cooling is completed.
The ON/STANDBY LED lights in resistance.
•When the lamp is off, pressing the POWER button while the LAMP/COVER LED is flashing green will not switch the lamp on again.
To switch the lamp on again, please press the POWER button again after the ON/STANDBY LED lights in red.
3 Disconnecting the Power Cable
The ON/STANDBY LED on the operation panel will go off.
The power cord can be disconnected even while the lamp/cover LED is flashing green (direct power off function). The fan continues to run for a while to cool the machine.
• Do not disconnect the power cord while the lamp is lit.
• Unplug the power plug of the projector from the wall outlet when the projector will not be used for an
extended period.
CAUTION • When the reinserting the power plug into the outlet soon after having unplugged it, please allow a fixed time (of about 10 seconds) before doing so.
• Wait for the cooling fan to stop turning before stowing away.