Method of OHP Operation
Attaching the Document Cover
The mounting orientation of the document cover can be changed to the opposite direction in accordance with the circumstances circumstances.
TEST
RGB
S
V
L
接電源続コをーしドてはく必だずさアいー。ス ACIN
NOTE: When removing the document cover, lift the cover by both hands and remove it.
R AUDIO USB
Preparation of the Projection Document
The document (printed material) that is to be projected is placed on the projector as illustrated in the diagram below and the document cover is closed.
Horizontal document Top side
Vertical document
Top side
NOTE:
•The document can be projected even when the document cover has not been closed; however, in this instance, unnecessary items may be projected which will make the image difficult to view.
•When shiny paper like magazine covers or black paper is placed on the projector, the internal fluorescent light bulb may be reflected in it, making the edges of the projected document hard to see.
Reading Size of Projection Documents
The maximum reading size of documents and printed material is 216 mm high by 288 mm wide.
Consequently, when A4 paper (210 mm high and 297.5 mm wide) is placed on the projector, reading will be as illustrated in the diagram below (which depicts the area that can be projected as the portion with diagonal lines).
The portion that falls outside of the reading range will not be projected; therefore, shift the paper as required.
A4 Paper
297 mm (Paper size)
288 mm (Reading size)
216 mm (Reading size) |
|
|
|
| |
210 mm (Paper size) |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
Other functions that are used in the OHP operation can be seen on the following pages:
●Switching the input to OHP → See Page
●Changing the projection image to a still image display → See Page
●Capturing a projection image → See Page
●Viewing captured images → See Page