Regular Operation

This section describes the use of direct operation using the projector and remote control buttons.

Please see the items on Page E-32 "Menu Operation Method" and Page E-35 "Menu Description" for information about operation using the menu.

Select the Input

When the projector’s power is turned on, one of the input selection icons ([OHP, PC or VIDEO] or [OHP, VIDEO (D4) or VIDEO]) is displayed.

(When the PC input is set to RGB)

POWER

INPUT PORTRAIT FREEZ

TRANSFER

OHP PC VIDEO

(When the PC input is set to component)

Operation with the Projector

Select the input using the INPUT buttons.

The input switches in the order OHP → PC → VIDEO or OHP → VIDEO (D4) → VIDEO each time the button is pressed.

Operation with the Remote Control

Select the input using the INPUT SELECT buttons.

OHP VIDEO

VIDEO (D4)

* For instructions on selecting the PC input, see page E-35.

NOTE:

The input mode at starting time will be the same as it was the last time the projector was switched off.

When the icon is displayed, either the left or right key permits input switching.

Changing the Orientation of the Projection Image Effective Only with OHP Input

This operation switches the (vertical/horizontal) orientation of the currently projected image. The display of the switched screen is adjusted to match the width.

A B C

POWER

INPUT PORTRAIT FREEZE OF

TRANSFER

Operation with the Projector

Press the PORTRAIT button.

Operation with the Remote Control

Press the PORTRAIT button.

E-23