Kenwood CK 740 manual Installation

Models: CK 740

1 48
Download 48 pages 10.47 Kb
Page 34
Image 34
8 - INSTALLATION

8 - INSTALLATION

INSTALLATION

This cooker has class “2/1” overheating protection so that it can be installed in a cab- inet.

The furniture walls adjacent to the cooker must be made of heat resistant materials.

The veneered syntetical material and the glue used must be resistant to a temperature of 90°C in order to avoid ungluing or deformations.

The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in a room containing a bath or shower.

Curtains must not be fitted immediately behind the appliance or within 500 mm of the sides.

It is essential that the cooker is positioned as stated below.

The cooker must be installed by a qualified technician and in compliance with a local safety standards.

If the cooker is located on a pedestal it is necessary to provide safety measures to pre- vent it from falling out.

750 mm

500

mm

 

mm

50 mm

450

 

Fig. 8.1

air

flow

 

34

Page 34
Image 34
Kenwood CK 740 manual Installation