![Editing](/images/new-backgrounds/27854/2785441x1.webp)
Editing
The CD contents are edited as follows.
(1)The tape recording time input is divided by two, and tracks that can be accommodated in file A (which refers to tracks on tape side A) are selected in order of their track Nos.
(2)In a few seconds, the time left on tape side A is displayed, then file B (tracks on tape side B) is edited in the same manner.
2 1
Editing in the FILE A
EDIT A 01
The selected track numbers are displayed in sequence.
EDIT A -1:23
Remaining time display.
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or
Notes | the last track on side A or side B may be cut short. | |
2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music. | ||
|
To check the edited contents
Remote control unit only
RC operation
CHECK
GRC operation
Check
ENTER
EDIT A 01
÷When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B.
Playing or recording the edited contents
RC operation
6
GRC operation
Return
ENTER
ENTER
Press the 6key to start playback according to the edited content. The playback pauses at the beginning of the track Note edited for tape side B. Press the 6 key again to continue
playback.When recording the edited content onto a tape, it is recommended to use the synchro recording or CCRS recording function of KENWOOD cassette decks.
÷For details, see the instruction manual of the cassette deck.
To clear the edited contents
RC operation
P.MODE
CLEAR
GRC operation
Press any one of these keys.P.mode
ENTER
Clear
ENTER | ÷ The edited data is cleared entirely. |
Main unit operation
0