Editing
The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle 2 0 at the ends of sides A and B.
Preparation | ÷ Load a disc in the CD player. |
|
| ÷ Check that the unit is in the normal play | |
| TRACK mode. | # |
÷ Set the INPUT SELECTOR to ”CD“ on the connected device such as AV CONTROL CENTER or receiver.
GRC operation : Complete the procedure in “Basic Operations for the Graphical Remote Control Unit (GRC)”
90
MULTIPLE CD PLAYER
: Keys and control used in the operations described on this page.
1Light the “EDIT” indicator.
Do this operation in the stop mode. | Blinks. |
RC operation
GRC operation
EDIT MODE
EDIT C-??
Mode
ENTER
Edit
ENTER
Go to step 2 within 8 seconds.
If more than 8 seconds have elapsed, press the key again.
2Enter the recording time of the tape.
RC operation
123
678
GRC operation
When using the numeric keys:
| +10 | 1 | 2 | 3 |
4 | 5 | 4 | 5 | 6 |
9 | 0 | 7 | 8 | 9 |
|
| 0 | +10 | |
RC operation Press the numeric keys as shown below.
GRC operation Press the ENTER key after selecting each nu- meric icon.
ENTER
When using the TIME key:
1Select the time.
TIME
Time
ENTER
2Set the entry.
EDIT MODE
E d i t
EDIT C-46
÷Recording within 99 minutes can be specified in minutes (2 digits).
÷If you commit a mistake in time entry, press the P.MODE key and restart the procedure from the beginning.
÷By pressing the TIME key the set
this order: "46=54=60=74=90=??"
=
÷ The interval length can be adjusted with the skip keys 4 and ¢ in units of one minute (to a maximum of 99 minutes).
ENTER
