In case of difficulty
|
| |
What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the |
|
|
table below to see if the problem can be corrected before seeking help from your dealer or service representative. | 2 | 5 |
|
Operation to reset
The microcomputer may fall into malfunction (impossibil- ity to operate, erroneous display, etc.) when the connec- tion cords are unplugged while unit is ON or due to an external factor. In this case, execute the following method to reset the microcomputer and return it to normal condi- tion.
Unplug the power cord from the power socket and plug the power cord into the socket again.
÷Please be aware that resetting the CD player will erase all stored information and return it to the factory settings.
CD player unit
| Symptom | Cause | Remedy |
| |
|
|
|
|
| |
The unit is not turned ON with the ON/ | ÷ Power plug is loosely connected. | ÷ Insert the power plug firmly to the AC outlet. | |||
STANDBY( |
| ) key ON. | ÷ With the power plug connected to the switched | ÷ Turn the amplifier’s power ON. |
|
|
| ||||
|
|
| AC outlet of an amplifier, the power of the |
|
|
|
|
| amplifier is turned off. |
|
|
|
|
|
|
| |
Disc is loaded, player does not play. | ÷ Disc is loaded upside down. | ÷ Load the disc again with its label side up. | |||
|
|
| ÷ Disc is loose. | ÷ Insert the disc properly. |
|
|
|
| ÷ Disc is dirty. | ÷ Wipe off the dust on the surface of the disc | |
|
|
|
| referring to ”Disc handling precautions“.¢ | |
|
|
| ÷ Disc is cracked. | ÷ Replace the disc with a new one. |
|
|
|
| ÷ Condensation has occurred on the optical lens | ÷ Leave the player for about 1 hour so that the | |
|
|
| unit. | condensation is removed. | ¢ |
|
|
|
|
|
|
No sound. |
|
| ÷ Play mode is not entered. | ÷ Press the 6 key. |
|
|
|
| ÷ Disc is too dirty. | ÷ Wipe off the dust on the disc surface referring | |
|
|
|
| to ”Disc handling precautions“. | ¢ |
|
|
| ÷ Disc is cracked. | ÷ Replace the disc with a new one. |
|
|
|
| ÷ The connection cords are inserted loosely. | ÷ Connect all connection cords firmly. |
|
|
|
|
|
| |
Music is interrupted. (Sound is skipped.) | ÷ Disc is too dirty. | ÷ Wipe off the dust on the disc surface referring | |||
|
|
|
| to ”Disc handling precautions“. | ¢ |
|
|
| ÷ Disc is cracked. | ÷ Replace the disc with a new one. |
|
|
|
| ÷ Oscillation is applied to this unit. | ÷ Try selecting a place where no strong vibra- | |
|
|
|
| tions occur by changing the installation place, | |
|
|
|
| etc. |
|
|
|
|
|
|
|
