4
System connections
Caution:
Do not plug in the power lead until all connections are com- pleted.
Make connections as shown below.
When connecting the related system components, refer also to the instruction manuals of the related components.
Malfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the | |
microcomputer referring to “In case of difficulty”. | ∞ |
Caution regarding placement
To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) equal to, or greater than, shown below.
Left and right panels: 10 cm | Rear panel: 10 cm |
|
| ||
| optical fiber cable |
| |
75Ω coaxial cable with RCA PIN. | (OPTICAL) | Digital component (MD, DAT, etc.) | |
| |||
| DIGITAL INPUT |
|
|
| (COAXIAL) |
|
|
| AC 110- | AC 220- |
| TEXT | 120V | 240V |
|
|
| |
L | OPTICAL COAXIAL |
|
|
|
|
| |
R |
|
|
|
|
| SISTEM |
|
LINE OUTPUT | DIGITAL OUTPUT | CONTROL |
|
Remove the protection cap when using
the DIGITAL OUTPUT (OPTICAL) jack.
Audio cord
To AC outlet
System control cord
SYSTEM
CONTROL
CD
L
R
AV CONTROL CENTER (sold separately) or receiver (sold separately)
AV CONTROL CERTER
To wall AC outlet
The above illustration is simply an example.
The actual connected equipment may vary depending on the sales region.
| 1. | Connect all cords firmly. If connections are loose there could be loss of sound or noise produced. |
Notes | 2. | When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging |
|
|
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
