Programmed play (PGM mode)
To check or change the programmed tracks
RC operation |
| GRC operation |
Remote control unit only
Blinks.
1 7
1 Press the CHECK key.
CHECK | Check |
| |
Press until the track No. to | ENTER |
| |
be changed is displayed. |
|
2Select the new track No.
PGM01 TNO.25
÷Perform only step 1 to simply check the program.
÷In the case of a
÷Each time the key is pressed, the program No. and the track No. on CD are displayed.
|
|
|
|
| 1 | 2 | 3 |
|
|
|
| +10 |
| 5 |
|
1 | 2 | 3 | 4 | 5 | 4 | 6 | |
|
|
| |||||
6 | 7 | 8 | 9 | 0 | 7 | 8 | 9 |
0 +10
ENTER
3Set the entry.
P.MODE | P.mode |
| |
| ENTER |
Example
↓
÷Press it while the “PGM 01” indicator blinks.
÷The track being played cannot be changed.
To add a track to the program
Remote control unit only
RC operation
GRC operation
1Select the desired track No.
|
|
|
| +10 |
1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | 9 | 0 |
1 2 3
4 5 6
7 8 9
0 +10
ENTER
2 Press the P.MODE key. | ÷ When a track No. is selected, the track will be added to the end of the |
| existing program. |
To clear tracks from the program
Remote control unit only
RC operation |
| GRC operation |
Press to clear tracks from the end.
CLEAR
Clear
ENTER
To clear all track.
P.MODE
P.mode
ENTER
÷Each time the key is pressed, the last track in the program is cleared.
÷The tracks which are programmed earlier than the track being played cannot be cleared.
÷Selected tracks can be also completely cleared just by operating the 0 key.
÷The entire program is cleared.
Auto space function
During programming of tracks, a
÷Even when the performances of two tracks are continuous (which occurs with classical or live recording music), the spaces will be created if they have different track Nos.