Specifications, 111, Camera System | Sony MVC-CD350 instruction

Specifications

xCamera [System]

Image device

6.67mm (1/2.7 type) color CCD Primary color filter

Total pixels number of camera Approx. 3 338 000 pixels

Effective pixels number of camera Approx. 3 207 000 pixels

Lens 3× zoom lens

f = 6.4 – 19.2 mm (9/32 –

25/32 inches) (41 – 123 mm (1 5/8 – 4 7/8 inches) when converted to a 35 mm still camera

F3.8 – 3.9

Exposure control

Automatic exposure, Scene selection (7 modes)

White balance

Automatic, Daylight, Cloudy,

Fluorescent, Incandescent, Flash

File format (DCF compliant)

Still images: Exif Ver. 2.2 JPEG compliant, GIF (for Clip Motion), TIFF, DPOF compatible

Audio with still image: MPEG1 compliant (Monaural) Movies:

MPEG1 compliant (Monaural)

Recording media

8 cm CD-R/CD-RW

Flash Recommended distance (ISO set to Auto): 0.8 m to 2.5 m (31 1/2 inches to 8 feet 2 7/16 inches)

[Drive]

Readout Non-contact optical readout (using semiconductor laser)

Laser Wavelength: 779 to 789 nm Maximum output: 23 mW

[Input and Output connectors]

A/V OUT (MONO) (Monaural)

Minijack

Video: 1 Vp-p, 75 Ω , unbalanced, sync negative

Audio: 327 mV (at a 47 kΩ load) Output impedance 2.2 kΩ

USB jack mini-B

[LCD screen]

LCD panel

6.2 cm (2.5 type) TFT drive

Total number of dots

123 200 (560×220) dots

[General]

Used battery pack

NP-FM50

Power requirements

7.2 V

Power consumption (during shooting with LCD backlight on)

2.6 W

Operating temperature

0°C to +40°C (32°F to +104°F)

Storage temperature

–20°C to +60°C (4°F to +140°F)

Dimensions 131.7×92.3×73.8 mm

(5 1/4×3 3/4×3 inches) (W/H/D, excluding maximum protrusions)

Mass Approx. 522 g (1 lb 2 oz) (including battery pack NP-FM50, disc, and lens cap)

Built in microphone

Electret condenser microphone

Built-in speaker

Dynamic speaker

Exif print Compatible

Print Image Matching II Compatible

Additional information

111

Image 111

Sony MVC-CD350 operating instructions Specifications, 111, Camera System

Contents

Enjoying movies Model No. MVC-CD350 Serial No If you have any questions about this product, you may call Regulatory Information Declaration of Conformity Recycling LITHIUM-ION Batteries Before using your camera Do not aim the camera at the sun or other bright light Clean the flash surface before useDo not get the camera wet Do not expose the camera to sand or dust Table of contents Still image editing Required Flow chart for disc operationsIntroduction Capture images with your computer See the pages in parentheses for details of operation Identifying the parts Image Size/Delete button 20 SET UP To set the SET UP itemsSCN To shoot in the Scene Selection mode To view or edit images Hook for shoulder strap Slide the cover in the direction of the arrow Charging the battery packOpen the battery cover Install the battery pack, then close the battery cover CHG lamp Battery pack Charging time Min NP-FM50 supplied Battery life min Image size No. Battery life Images Min Power sources Using an external power source Using your camera abroad Turning on/off your camera How to use the control button Press PowerTurning off the power Set the mode dial to Setting the date and time Date and time are entered and the clock starts to keep time Select OK with B on the control button, then press z Close the disc cover Inserting and removing a discOpen the disc cover Place a disc in the disc tray Select OK with v on the control button, then press z What is initialization?To cancel initialization Initializing a disc Press Image Size Setting the still image sizeSet the mode dial to and turn on the power Image Size setup appears Quality3 Fine Standard Image size Image size and qualityNumber of images that can be saved in a supplied CD-R2 Image size Examples Press and hold the shutter button halfway down Basic still image shooting Auto adjustment modeSet the mode dial to , and turn on the power Do not cover the lens or flash with your fingers SCN Scene Selection Auto adjustment modePress the shutter button fully down Program auto shooting To delete the image displayed on the screen Using the zoom featureChecking the last image you shot Quick Review Press b 7 on the control button Shooting close-ups Macro Macro recording mode is used whenWhen the zoom is set all the way to W side When the zoom is set all the way to T side Using the self-timer To return to normal recording modeIndicator disappears Selecting a flash mode To cancel the self-timer in the middle of the operationEach time you press v , the indicator changes as follows To reduce the red-eye phenomenon when shooting live subjects Indicators on the screen during shooting Set the mode dial to SET UP SET UP screen appearsInserting the date and time on a still image Index nine-image screen Viewing images on the LCD screen of your cameraViewing single images Single single-image screen Screen Viewing an index screen nine-image or triple-imageImage screen To display the next previous index Press b/B on the control button to select the desired image Turn on the TV and set the TV/ Video switch to VideoSet the mode dial to , and turn on the camera Viewing images on a TV screen Ntsc system Viewing images on a TV screen PAL-M systemPAL-N system Secam system Select Delete with v on the control button, then press z To cancel deletingDeleting images Press Delete Green indicator appears on Deleting images in index nine-image mode Select Exit with b on the control button, then press z Deleting images in index triple-image mode CD-R cannot be formatted Formatting a CD-RW Select OK with v, then press z To cancel formattingSelect Cancel with V on the control button, then press z Format Place on level surface appears on the LCD screen To turn off the SET UP screen display How to setup and operate your cameraChanging the menu settings Changing the items in the SET UP screen Deciding the still image quality Mode dial /SCNMode dial SET UP Set the mode dial to or SCN Press Menu Changing the recording folder To cancel folder creationTo cancel changing the recording folder Creating a new folder Choosing a focus range finder frame Choosing an auto focus method Continuous AF Choosing a focus operationSingle AF Monitoring AF Shooting techniques To reactivate auto focusing Setting the distance to the subjectAdjusting the exposure Focus preset Select the desired exposure value with v/V Selecting the metering modeTo reactivate auto exposure Select EV with b/B Adjusting color tones To reactivate auto adjustmentWhite Balance Adjusting the flash level You can adjust the amout of flash lightFlash Level Shooting multiple frames Clip MotionBefore operation Shooting in Multi Burst mode Set the mode dial to Press MenuMulti Burst To return to normal mode Shooting two images continuouslyBurst Mail Shooting still images in Tiff modeSelect Mode REC Mode with b/B, then select Tiff with Shooting still images for e-mail Select Mode REC Mode with b/B, then select Voice with Shooting still images with audio filesVoice Scene Selection Shooting according to scene conditions To cancel Scene Selection Picture Effect To cancel Picture EffectsAdding special effects Confirming whether to record images To confirm recording of images shot in the Burst 2 mode Record the imageIf you select Delete Selecting the folder and playing back images To cancel the selectionWhen multiple folders are created in the disc Mode dial Select the desired folder with Enlarging an image Playback zoom To cancel playback zoomAdjust the image size with the zoom W/T button Enlarging a portion of a still image Slide Show To cancel the Slide Show settingPlaying back successive images Recording an enlarged Image Trimming To skip to the next/previous image during the slide show To cancel rotationRotating still images To stop slide show playback Playing back frame by frame Playing back images shot in Multi Burst modePlaying back continuously To pause playback To delete shot images To return to the normal playback Protecting images Single-image modeIndex nine-image mode To cancel the protection Index triple-image mode Resize To cancel resizingChanging image size Choosing images to print To unmark the mark Select Dpof with b/B, then press zRepeat to mark other images Select Dpof with v, then To unmark marksTo unmark all the marks in the folder To exit the mark function Before starting Indicators during shootingUsing the self-timer Shooting movies To advance or rewind the movie Indicators during viewing moviesTo adjust the volume Viewing movies on the LCD screen Select Delete with v, then press z To cancel deletionDeleting movies Delete To delete all movies in the folder Select Exit in orSelect Exit in , then press z There are two methods for viewing images on a computer When a USB connector is not provided on your computerViewing images on your computer Communication with your computer Viewing images using CD-ROM drive What is finalization?Finalizing a disc To unfinalize again after canceling the unfinalization To cancel finalizationCanceling finalization Unfinalize CD-RW only To cancel the unfinalization Tabs on the inner circle Using the supplied 8cm CD adapterSlide the disc into the inner Groove and under two Double-click the desired image file Folder contents are displayedViewing images through a CD-ROM drive Windows 98/98SE/2000/Me/XP Example For Windows Me users Image file storage destinations and image file names 101MSDCF Folder File name File meaning Copying images into your computer through a USB connection Installing the PTP Manager Select PTP Manager as a program folder, then click Next Check the settings and click NextSelect the destination folder, then click Next Select Program Folder screen appears Windows 98/98SE/2000/Me/XP Installing ImageMixerConnecting the camera to your computer Install ImageMixer according to the screen USB Mode PTP appears on the LCD screen of the camera Turn on your computer and the cameraWindows 98/98SE/2000/Me Users Images are copied to the copy destination folder Copying imagesSelect the images that you want to copy, then click Next Images in the selected recording folder appear When the PTP Manager does not start up Copying images using the Windows XP AutoPlay WizardWindows XP Make a USB connection Viewing images on your computer Creating a Video CDFor Mac OS X v10.0/v10.1/ v10.2 users Troubleshooting Battery pack and powerBottom of the camera using a fine-tipped Remaining indicator is Symptom Cause Solution Battery remainingIndicator is incorrect, or Sufficient battery SCN or Shooting still images/movies Macro function does Symptom Cause Solution Your camera cannotRecord images Flash does not work Deleting/Editing Images Viewing images Computers Disc Others Following messages may appear on the screen Can not unfinalize Message Meaning/Corrective action Not enough batteryFormat error Turn the power off and on E61 ss Self-diagnosis displayCode Cause Corrective action C32 ss C13 ss Recording mode Image size Number of images that can be saved or shooting timeNumber of still images that can be saved Shooting time 100 101 When the mode dial is set toWhen the mode dial is set to Or SCN Menu items 102 103 ± Flash LevelInterval 104 Disc Tool SET UP items105 Camera 106 Setup 107 Precautions 108 On internal rechargeable button batteryCleaning the disc On discs 109 On InfoLITHIUM battery packWhat is the InfoLITHIUM battery pack? Charging the battery pack Battery life Effective use of the battery packRemaining battery time indicator How to store the battery pack Specifications 111Camera System AC-L15A/L15B AC Adaptor NP-FM50 battery packAccessories 112 LCD screen When shooting still imagesCenter AF indicator 43/ Focus preset value Mode dial indicator/ Flash mode indicator EV level indicator 46 N Macro indicator When shooting moviesSelf-timer indicator 26 P Menu/Guide menu Recording time maximum recordable time indicator Image number/Number of images recorded in selected When playing back still images When playing back moviesPlayback folder indicator 59 R Image number/Number 115 116 Index GIF 117 USB 118Page 308183511