Sony MVC-CD350 operating instructions Others

Others

Symptom	Cause	Solution
Your camera does not	• You are not using an “InfoLITHIUM” battery	p Use an “InfoLITHIUM” battery pack (page 109).
work.	pack.
	• The battery level is low. (The E indicator	p Charge the battery pack (page 11).
	appears.)
	• The AC Adaptor is not connected securely.	p Connect it securely to the DC IN jack of your camera and to a
		wall outlet (page 14).
The power is on, but the	• The built-in microcomputer is not working	p Disconnect, and then, after one minute, reconnect all power
camera does not work.	properly.	sources and turn on the camera. If this does not work, press the
		RESET button on the bottom of the camera using a fine-tipped
		object, then turn on the power again. (All the settings including
		date and time are cleared.)
You cannot identify an	—	p Check the indicator (page 113).
indicator on the screen.
The lens gets fogged.	• Moisture condensation has occurred.	p Turn off the camera and leave for about an hour at room
		temperature for the moisture to evaporate before use (page 108).
A file error occurs when	• The image file has an error.	—
you play back a file.	• The image was not recorded correctly.	—
	• The disc is dirty	p Clean the disc (page 108).
	• The disc may be scratched.	p Replace the disc.

Troubleshooting

95