Sony MVC-CD350 Clean the flash surface before use, Do not get the camera wet, Trademarks

Models: MVC-CD350

1 120
Download 120 pages 18.19 Kb
Page 5
Image 5

Clean the flash surface before use

The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.

Do not get the camera wet

When taking pictures outdoors in the rain or under similar conditions, be careful not to get the camera wet. If moisture condensation occurs, see page 108 and follow the instructions on how to remove it before using the camera.

Do not expose the camera to sand or dust

Using the camera in sandy or dusty locations may cause malfunction.

Do not aim the camera at the sun or other bright light

This may cause irrecoverable damage to your eyes. Or it may cause the malfunction of your camera.

Notes on the camera locations

Do not use the camera near a location that generates strong radio wave or emits radiation. The camera may not be able to record or play back properly.

Do not use the camera near a TV, radio, tuner. Noise may be caused on the camera.

The pictures used in this manual

The photographs used as examples of pictures in this manual are reproduced images, and are not actual images shot using this camera.

Trademarks

“InfoLITHIUM” is a trademark of Sony Corporation.

Microsoft and Windows are registered trademarks of the U.S. Microsoft Corporation in the United States and other countries.

Macintosh and Mac OS are trademarks or registered trademarks of Apple Computer, Inc.

Pentium is a trademark or a registered trademark of Intel Corporation.

In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the or ® marks are not used in all cases in this manual.

5

Page 5
Image 5
Sony MVC-CD350 Clean the flash surface before use, Do not get the camera wet, Do not expose the camera to sand or dust