Initializing a disc

What is initialization?

Initialization is required to record images on a disc.

When you perform finalization (page 75) using your camera to view images through

aCD-ROM drive, initialization is also automatically performed, and you can continue to record images. Images recorded before finalization remain on the disc.

Mode dial

1

,Insert a new disc and set the mode dial to , then turn on

the power.

“Initialize Place on level surface” appears on the LCD screen.

To cancel initialization

Select [Cancel] with V on the control button, then press z. After canceling the initialization, open and close the disc cover, then perform the procedure from step 1.

You can also carry out this operation when the

mode dial is set to , SCN or .

You can also perform initialization using

1

(Disc Tool 1) in the SET UP settings (page 105).

Initialize

 

Initialize

 

Initialize

Avoid any vibration

 

Avoid any vibration

 

 

Ready to initialize

 

Initialize in progress

 

Initialize complete

 

 

 

 

 

 

 

 

2

,Select [OK] with v on the control button, then press z.

Initialization starts. Do not shake or strike the camera during initialization.

Shooting still images

19

Page 19
Image 19
Sony MVC-CD350 operating instructions Initializing a disc, What is initialization?, To cancel initialization