Programmed play (PGM mode)

DP-5090/4090 (En)

Use the following procedure to program desired tracks in a14 desired order. (up to 32 tracks)

Preparation ÖLoad a disc in the CD player.

COMPACT DISC PLAYER DP-5090

REMOTE CONTROL UNIT

RC-P0505

: Keys and control used in the operations described on this page.

1Press so that the “PGM” indicator lights.

Do this operation in the stop mode.

P.MODE

RC-P0505

2Program desired tracks.

1 Select the desired track No.

Press the numeric keys as shown below....

To enter track No. 25: 005

 

1

2

3

RC-P0505

4

5

6

 

7

8

9

 

 

0

+10

Go to step 2 within 8 seconds.

2Set the entry.

P.MODE

RC-P0505

3Repeat steps 1 and 2 above.

3Start playback.

6

RC-P0505

Blinks.

PGM01 TNO.??

PGM01 TNO.25 AB

Ç￿

PGM01 ABCDEFGH

In the case of a CD-TEXT disc, the track’s title is scrolled on the display.

PGM01 TNO.25

ÖTracks can also be selected by pressing the 4 or ¢ key.

ÖUp to 32 tracks can be programmed. When “FULL” is displayed, no more tracks can be programmed.

ÖIf you make a mistake, press the CLEAR key and enter the track No. from the beginning.

ÖWhen the total playing time of the programmed tracks exceeds 100 minutes, the remaining time on the disc will not be displayed any more.

ÖWhen the 4or ¢key is pressed during playback, the track will be skipped in the direction of the pressed button.

ÖWhen the 4key is pressed once during playback, the play position returns to the beginning of the current track being played.

To stop playback

7

ÖThe programmed contents remain in memory.

RC-P0505