6

SYSTEM CONTROL CONNECTIONS

Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations.

There are two KENWOOD system control modes. Make connections according to the groups of terminal symbols shown below.

[XS8] Mode : lets you combine F, f, and Ä terminals

[SL16] Mode : for terminals only

This unit is compatible with both [XS8] and [SL16] modes. Select the mode according to the connected components. 4

SL16 XS 8

j

DP-5090/4090 (En)

Amplifier or receiver

SYSTEM

CONTROL

This unit

SYSTEM

CONTROL

Cassette deck

SYSTEM

CONTROL

ÖDo this operation after completing all connections. (Ensure that the power is OFF.)

Notes

1.If your amplifier or receiver does not have a system control terminal, do not connect any system control cords to the system control ter-

minals on the other components.

2. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your equipment.

3.Be sure the system control plugs are inserted all the way in to the system control terminals.

SYSTEM CONTROL OPERATIONSRemote Control

Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver.

Automatic Operation (Except [XR] equipment)

Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.

Synchronized Recording (Except [XR] equipment)

Lets you synchronize recording with the start of playback when recording from CD. Also, the simple CCRS operation lets you make great recordings from CD.

See the operating instructions supplied with your cassette deck for details.