Timer operations
| Timer playback of CD can be started at any time using an | This unit |
| 20 audio timer which is available in audio stores. |
|
System control cord | Audio cord |
Preparation ÖConnect the power cords of the associated components so that their power can be turned ON through the audio timer.
(Also, be sure to read carefully the instruction manual of the timer.)
Amplifier
| 12 : 00 |
Audio timer | To wall AC outlet |
|
1
2
Turn the powers of the associated components ON.
Preparation
ÖIf the amplifier is not connected to the CD player through a system control cord, select the "CD" input with the input selector.
Load a disc in the CD player. | 0 |
Label side
3Set the amplifier volume.
1Play the disc.
6
2Adjust the amplifier volume.
3Stop the disc.
7
4Set the timer ON time.
Set the timer so that it supplies power at the specified time.
ÖWith some audio timer models, the power is automatically turned OFF when the timer ON time is set. With such a model, skip step 5 below.
5Turn OFF the power output from the audio timer.
ÖDo not touch the POWER switches of the amplifier and CD player. ÖWhen the set time comes, the disc playback starts automatically.
Notes | 1. | Some amplifiers cannot be used with a timer. Before using a amplifier, check it. | |
2. | When operating the unit other than CD player using an audio timer, be sure to remove the disc from the CD player. | ||
|