DP-5090/4090 (En)

To check the edited contents

CHECK

19

EDIT A 01

RC-P0505

ÖWhen the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B.

Playing or recording the edited contents

6

RC-P0505

Press the 6key to start playback according to the edited content. The playback pauses at the beginning of the track Note edited for tape side B. Press the 6 key again to continue

playback.

When recording the edited content onto a tape, it is recommended to use the synchro recording or CCRS recording function of KENWOOD cassette decks.

ÖDo not adjust the output level from this unit particularly during record- ing.

ÖFor details, see the instruction manual of the cassette deck.

To clear the edited contents

Press any one of these keys.

P.MODECLEAR

RC-P0505

0

ÖThe edited data is cleared entirely.

Peak search

This function identifies the highest peak level of the entire recording on a CD before recording the CD on the cassette deck.

With this unit, after the peak level of each track recorded on the CD has been searched, the section of the music containing the highest peak level will be played repeatedly so that the recording level of the cassette deck or MD (analog recording) can be adjusted easily.

This feature is particularly convenient when using a cassette deck with manual recording level adjustment which does not have the automatic recording level adjustment function.

(This unit cannot perform peak search recording when used with a cassette deck equipped with the peak search function.)

PEAK

PEAK SEARCH

ÖAfter a high-speed search of all tracks, the searched peak level section will be repeated at normal speed.

ÖThe peak level is detected by sampling the section which seems to contain the maximum level in the disc. However, it may happen that the transient maximum level is not detected. Therefore, it is recommended to set the recording level by leaving a certain margin above the detected peak level.

To cancel Peak search:
Press the 7key.