System connections

4 Caution:
Do not plug in the power lead until all connections are com- pleted.

Make connections as shown below.

When connecting the related system components, refer also to the instruction manuals of the related components.

DP-5090/4090 (En)

Malfunction of microcomputer

If operation is not possible or erroneous display appears even though all connections have been made properly, reset the

microcomputer referring to “In case of difficulty”.

Á

Caution regarding placement

To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) equal to, or greater than, shown below.

Left and right panels: 10 cm

Rear panel: 10 cm

 

 

 

Commercially-available

 

optical fiber cable

75Ω coaxial cable with RCA PIN. (Commercially-available)

(DP-5090 only)

LINE 1 and LINE 2 output are the same pair of signals. Use these jacks to connect the unit to other system components.

Digital component (MD, DAT, etc.)

(OPTICAL)

DIGITAL INPUT

(COAXIAL)

AC110-220V 2 3AC220-240V

OUTPUT

DIGITAL

SYSTEM

 

OUTPUT

CONTROL

Ä

TEXT

LINE 1 LINE 2

OPTICAL COAXIAL

LL

SL16 XS 8

RR

(Except for DP-4090)

Remove the protection cap when using the DIGITAL OUTPUT (OPTICAL) jack.

Commercially-available optical fiber cable

CD

L

R

Audio cord

SL 16/XS8 switch 6

DIGITAL

INPUT

OPTICAL

To AC outlet

System control cord

SYSTEM

CONTROL

Digital amplifier

(or ordinary amplifier,

Ê Ê Ê receiver, etc.)

To wall AC outlet

 

1.

Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.

Notes

2.

When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging

 

 

connection cords without removal of the power cord can cause malfunctions or damage to the unit.