6Confirm the Security Code

Press the Control knob for at least 3 seconds. When “RE-Enter” is displayed, “Code” is also displayed.

7Do the step 3 through 6 step operation, and reenter the security code.

“Approved” is displayed.

The Security Code function activates.

⁄

•If you enter a Code different from your Security Code, you have to start over from step 3.

8Exit Security Code mode Press the [M.JOG] button.

Entering Security Code

The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed.

1Turn the power ON.2Do the step 3 through 6 step operation, and reenter the security code.

“Approved” is displayed.

⁄

•If an incorrect code is entered, “Waiting” is displayed, and the input prohibition periods shown in the table below is generated.

After the input prohibition time lapses, “Code” is displayed, and you can reenter the code.

Number of times theInput prohibited time

incorrect code was input

 

1

—

2

5 minutes

3

1 hour

4

24 hours

Manual Clock Adjustment1Select Clock Adjustment item during Menu mode

Select the “CLK ADJ” display.

For how to select menu items, refer to <Menu System>(page 14).

2Enter Clock Adjust modePress the Control knob for at least 1 second. The clock display blinks.
3Adjust the time

Push the control knob towards up or down to adjust the hours and right or left to adjust the minutes.

4Exit Clock adjustment mode Press the [M.JOG] button.Auxiliary Input Display Setting

Selecting the display below when changing to Auxiliary input source;

•“AUX”

•“DVD”

•“PORTABLE”

•“GAME”

•“VIDEO”

•“TV”

1 Select Auxiliary input display setting item during Menu mode

Select the “Name Set” display.

For how to select menu items, refer to <Menu System>(page 14).

2Enter Auxiliary input display setting mode Press the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed.

3Select the Auxiliary input display

Push the Control knob towards up or down.

4Exit Auxiliary input display setting mode Press the [M.JOG] button.

⁄

•When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes.

•The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. On the KCA-S220A, “AUX EXT” is displayed by default.

English 15