Kenwood DPX-MP3110, DPX-MP4110, DPX-MP5110U Sound Enhancer Control, Spectrum Analyzer Select, Illumination Color Select, Range, Display, Display, Display, Display, Setting item, Color setting

Sound Enhancer Control

Adjusts each function of Sound effect individually.

1Enter the Sound Effect Control mode Press the [SE] button for at least 1 second. “SE CTRL” is displayed.

2Select the Sound effect item for adjustment Push the Control knob towards right or left.

3Adjust the Sound effect itemPush the Control knob towards up or down.

Adjustment Item	Display	Range
Bass setting	“Bas”	Off/Low/High
LV setting	“LV”	Off/Low/High

4Exit the Sound Effect Control mode Press the [SE] button.

⁄

•Bass: Assisting the playback for the super bass sound.

•LV: Adjusts the sound image by changing the vertical position of the speakers virtually and increases or decreases the soundscape.

Spectrum Analyzer Select

Selecting the Spectrum Analyzer display.

Spectrum Analyzer	Display
Scan of Spectrum Analyzer	“S.A Scan“
Peak Hold	“PeakHold“
Spectrum Analyzer 1	“Flash“
Spectrum Analyzer 2	“Meter“
Spectrum Analyzer 3	“Gravity“
Spectrum Analyzer 4	“Tension“
Spectrum Analyzer 5	“Hana-Bi“
Spectrum Analyzer 6	“Laser”
Spectrum Analyzer 7	“Dance“
Spectrum Analyzer 8	“Warp“
Spectrum Analyzer 9	“Jump“
Spectrum Analyzer off	“S.A Off“

1Enter the Spectrum Analyzer Select mode Press the [COL] button for at least 1 second. “SPEANA” is displayed.

2Select the Spectrum Analyzer Turn the Control knob.3Exit the Spectrum Analyzer Select mode Press the [COL] button.

⁄

•Scan of Spectrum Analyzer:

The items from “PeakHold” to “Jump” are displayed in sequence.

Illumination Color Select

Select the illumination color for display, buttons and control knob.

1Enter the Illumination color Select mode Press the [COL] button.

“Color” is displayed.

2Select the setting itemPush the Control knob towards right or left.

Display	Setting item
“All”	Sets the same color for all of items.
“Display”	Sets the display color.
“Key”	Sets the button color.
“Rotary”	Sets the control knob color.

3Change the color Turn the Control knob.

Color setting	Display
Scan of Color 1-10	”V.Scan”
Color 1	”Color 1”
Color 2	”Color 2”
…	…
Color 10	”Color 10”
User color	”User”

4Exit the Illumination color Select mode Press the [COL] button.

⁄

•You can adjust the illumination color to your taste using RGB setting. See <User Color Setting> (page10) for detail.

•When illumination effect (I-EFCT) setting (page 14) is “2“, you can not set color.

•When illumination effect (I-EFCT) setting (page 14) is “3“, you can select “ALL“ and set “color1” to “10”.

English 9