Menu Operation
Menu SystemSet up the following functions;
Display | Setting | Setting overview |
| Source | ||
“Code Set” |
| Refer to |
| Sets security code. |
|
|
|
| page 14 |
|
|
|
|
0/1*/2/3 |
| Set the illumination color effect. |
| — | ||
|
|
|
| (page 19) |
|
|
“Beep” |
| On*/Off | Setting the operation check |
|
| |
|
|
|
| sound (beep sound) ON/OFF. |
|
|
“CLK ADJ” |
| Refer to |
| Sets the clock. |
|
|
|
| page 15 |
|
|
|
|
“DSI” |
| On*/Off | A red indicator will blink on the |
|
| |
|
|
|
| unit after the ACC is set to OFF, |
|
|
|
|
|
| warning potential thieves. |
|
|
“CONT“ |
| 1— 5*— |
| Adjusting the display contrast. |
|
|
| 11 |
|
|
|
| |
“SWPRE” |
| R*/SW |
| Sets the preout output. |
|
|
|
|
|
|
|
|
|
“Zone2” |
| R*/F |
| Specifies the destination of AUX |
|
|
|
|
|
| input sound when the Dual Zone |
|
|
|
|
|
| function is turned on. |
|
|
“AMP” |
| On*/Off | Turns on/off the |
|
| |
|
|
|
| amplifier. |
|
|
“SPRM” |
| On*/Off | Turns ON/OFF the Supreme |
|
| |
|
|
|
| function. |
|
|
“Auto” |
| Auto1*/ |
| Selects the tuning mode of |
|
|
|
| Auto2/ |
| the radio. |
|
|
|
| Manual |
|
|
|
|
| Refer to |
| Putting stations with good |
|
| |
|
| page 11 |
| reception in the memory |
|
|
|
|
|
| automatically. |
|
|
“CRSC” |
| Off/On* | Switches to Monaural to decrease |
|
| |
|
|
|
| noise when reception is poor. |
|
|
“Name Set” |
| Refer to |
| Sets the display when switched |
|
|
|
| page 15 |
| to AUX source. |
|
|
“SCL” |
| Auto*/ |
| Specifies whether the text is |
| — |
|
| MANU |
| scrolled automatically. |
|
|
“AUX” |
| Off/On* | Sets whether to display AUX |
|
| |
|
|
|
| during source selection. |
|
|
“CD Read” | 1*/2 | Sets the CD read mode. |
|
| ||
|
|
|
|
|
|
|
“DEMO” |
| Refer to |
| Specifies whether to enable |
| — |
|
| page 16 |
| demonstration. |
|
|
*Factory setting
Displayed item is depending on currently selected source. The mark in Source column shows the source to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB. : Can be set during FM reception.
: Can be set during Tuner reception.
: Can be set while accessing AUX source.
—: Can be set during all sources.
1 Enter Menu modePress the [M.JOG] button for at least 1 second. “Menu” is displayed.
2Select the Menu itemPush the Control knob towards up or down.
3Set the Menu itemPush the Control knob towards right or left.
4Exit Menu modePress the [M.JOG] button.
⁄
•Refer to the respective page for information on how to set the items with reference page number.
•”Zone2” is displayed when ”2ZON” in <Audio Setup> (page 8) is set to ”ON.
•Refer to the <Appendix> (page 18) for the details of the menu items.
•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.
Security CodeWhen Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off.
⁄
•When you activate the Security Code function, it cannot be released.
Note, your Security Code is the 4 digit number entered in your “Car Audio Passport” in this package.
1Select Security Code item during Menu mode Select the “Code Set” display.For how to select menu items, refer to <Menu System>(page 14).
2Enter Security Code modePress the Control knob for at least 1 second. When “Enter” is displayed, “Code” is also displayed.
3Select the digits to enterPush the Control knob towards right or left.
4Select the Security Code numbersPush the Control knob towards up or down.
5Repeat step 3 and 4, and complete the Security Code.14