Tuner Operation

Auto Memory Entry

Putting stations with good reception in the memory automatically.

1Select the band for Auto Memory Entry Push the Control knob towards up or down.

2Enter Menu modePress the [M.JOG] button for at least 1 second. “Menu” is displayed.3Select the Auto Memory Entry modePush the Control knob towards up or down. Select the “A-Memory” display.4Open Auto Memory Entry

Press the Control knob for at least 1 second. When 6 stations that can be received are put in the memory, Auto Memory Entry closes.

Function of remote control

Direct Access Tuning

Entering the frequency and tuning.

1Enter Direct Access Tuning modePress the [DIRECT] button on the remote control.

“– – – –” is displayed.

2Enter the frequencyPress the number buttons on the remote control.

Example:

Desired frequency

Press button

92.1 MHz (FM)

[0], [9], [2], [1]

810 kHz (AM)

[0], [8], [1], [0]

Cancelling Direct Access Tuning

Press the [DIRECT] button on the remote control.

⁄

•You can enter the FM band frequency in steps of a minimum of 0.1 MHz.

•If you make no button operation for 10 seconds, this function is automatically canceled.

Frequency Step Setting

Changing the tuning frequency step.

The original setting is FM band 50 kHz, and AM band 9 kHz.

1Turn the power OFFPress the [SRC] button for at least 1 second.2Switch the frequency stepWhile pressing the [1] and [5] buttons, press the [SRC] button.

Release your fingers from the button after the display appears.

The frequency step changes to FM band 200 kHz, and AM band 10 kHz.

⁄

•When the same operation is repeated, the frequency step returns to the original setting.

•When the frequency step is changed, the frequencies in the memory are deleted.

English 11