Kenwood DPX-MP3110, DPX-MP4110, DPX-MP5110U Audio Control, Adjusting the detail of Audio Control, Range, Range, Range, Range, Display, Display, Display, Display, Bass level, Middle level, Treble level

General Operation

Audio Control

You can adjust following Audio Control items ;

Adjustment Item	Display	Range
Rear volume	“R-VOL”	0 — 35
Subwoofer level	“SW L”	–15 — +15
System Q	“User”/“Rock”/	User setting/Rock/Pops/Easy/
	“Pops”/“Easy”/	Top 40/Jazz/Natural
	“Top40”/“Jazz”/	(The indicator turns on
	“Natural”	according to the setting.)
Bass level*	“BasLV”	–8 — +8
Middle level*	“MidLV”	–8 — +8
Treble level*	“TreLV”	–8 — +8
Balance	“BAL”	Left 15 — Right 15
Fader	“FAD”	Rear 15 — Front 15

Exit Audio Control mode (Volume control mode)

⁄

•“USER”: The customized Bass, Middle, and Treble levels are effective. This item can be selected at any time.

*You can adjust these items in detail. Refer to <Adjusting the detail of Audio Control> (Page 7).

*Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included)

1 Select the source to adjust Press the [SRC] button.

2Enter Audio Control mode Press the Control knob.3Select the Audio item to adjust Press the Control knob.4Adjust the Audio item Turn the Control knob.5Exit Audio Control mode Press any button.

Press a button other than the Control knob.

Adjusting the detail of Audio Control

Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail.

Bass level

Adjustment Item	Display	Range
Bass Center Frequency	”BasF”	40/50/60/70/80/100/
		120/150 Hz
Bass Q Factor	”BasQ”	1.00/1.25/1.50/2.00
Bass Extend	”B EX”	Off/On
Middle level
Adjustment Item	Display	Range
Middle Center Frequency	”MidF”	0.5/1.0/1.5/2.0 kHz
Middle Q Factor	”MidQ”	1.0/2.0
Treble level
Adjustment Item	Display	Range
Treble Center Frequency	"TreF"	10.0/12.5/15.0/17.5 kHz

⁄

•When you set the Bass Extend to ON, low frequency response is extended by 20%.

•You can exit the Audio Control mode at anytime by pressing any button except for Control knob and [ATT] button.

1 Select the Basic Audio item

Select the desired item to be set in detail from followings;

•Bass level

•Middle level

•Treble level

For how to select Basic Audio items, see <Audio Control> (page 7).

2Enter Detail adjustment mode of Audio Control

Press the Control knob for at least 1 second.

3Select the Detail Audio item to adjust Press the Control knob.4Adjust the Detail Audio item Turn the Control knob.5Exit the Detail Audio Control mode

Press the Control knob for at least 1 second.

English 7