Display Settings

Illumination Color Preset Memory

Saving the combination of the Illumination Colors selected for each place. The memory cannot be erased by the Reset button.

1Set the Illumination Color for each place Refer to <Illumination Color Selection> (page 9).

2Enter Illumination Color Preset Memory mode Select “COLOR” > “PRESET” > “MEMO”.

For how to select Function Control item, refer to <Function Control> (page 6).

3Put the Illumination Color Preset in the memory

Press the Control knob. “Memory?” is displayed.

4Turn the Control knob to select “YES”, and then press the Control knob.

“Memory Completed” is displayed.

5Exit Illumination Color Preset mode Press the [FNC] button.

Register 1 pair of Illumination Color Preset Memory.

If you press the Reset button, the value in the memory will be default setting value of “Illumination Color Selection.”

Illumination Color Preset Recall

Recalling the selection you saved in Illumination Color Preset mode.

1Enter Audio Preset Recall mode Select “COLOR” > “PRESET” > “RECALL”.

For how to select Function Control item, refer to <Function Control> (page 6).

2Recall the Illumination Color Preset Press the Control knob.

“Recall?” is displayed.

3Turn the Control knob to select “YES”, and then press the Control knob.

“Recall Completed” is displayed.

4Exit Illumination Color Preset Recall mode Press the [FNC] button.

When you recall Illumination Color Preset, the current Illumination Color settings will be replaced with the preset selection.

Auxiliary Input Display Setting

Selects the display below when changing to Auxiliary input source.

1Select Auxiliary input display setting item during Menu mode (In AUX mode)

Select the “Name Set” display.

For how to select Function Control items, refer to <Function Control> (page 6).

2Enter Auxiliary input display setting mode Press the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed.

3Select the Auxiliary input displayTurn the Control knob or push it towards up or down.

“AUX”/ “DVD”/ “PORTABLE”/ “GAME”/ “VIDEO”/ “TV”

4Exit Auxiliary input display setting mode Press the [FNC] button.

When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes.

The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. On the KCA-S220A, “AUX EXT” is displayed by default.

10 DPX-MP6110U